Topic: Two Beta v2 Filastruders - $100 shipped each
These have been sitting on a shelf. Everything needed is included, but it all has been used and tinkered with. One is loaded with ABS, the other with PLA. $100 shipped in the US.
1 2013-08-28 22:28:38 (edited by elmoret 2013-09-03 14:59:00)
- Gomisan
- Member
- Offline
Re: Two Beta v2 Filastruders - $100 shipped each
Shipped to Australia?
3 2013-08-29 09:15:10 (edited by ThatGuy 2013-08-29 09:38:45)
Re: Two Beta v2 Filastruders - $100 shipped each
What are those drive motors and where do I get some?
*Edited, just checked the filastruder website.
Re: Two Beta v2 Filastruders - $100 shipped each
Gomisan wrote:
Shipped to Australia?
Should be around $190 each to the land down under.
- Gomisan
- Member
- Offline
Re: Two Beta v2 Filastruders - $100 shipped each
Thanks.. I think I'm going to have to wait a month or so before I can spend any more money on this hobby. Pity, I'd really like to start playing with this stuff.
Re: Two Beta v2 Filastruders - $100 shipped each
Tim whats the difference between the Beta filastruder and the kit?
Re: Two Beta v2 Filastruders - $100 shipped each
- frozensoda
- Member
- Offline
Re: Two Beta v2 Filastruders - $100 shipped each
damn it why do the good deals come right after rent is due
I edit my posts a lot.
- 2n2r5
- Member
- Offline
Re: Two Beta v2 Filastruders - $100 shipped each
Tim, I'll take one. I'll have myself a little filament farm. :-)
SD3 w/ mods:
Glass bed with QU-BD heat pad upgrade, threadless ballscrew w/ 8mm smooth rod, spectra line belt replacement, lawsy MK5 extruder, Lawsy replacement carriage, E3D hotend, Ramps 1.4 w/ reprap discount controller, DRV8825 drivers, 12v 30A PS, Acrylic case, Overkill Y-idlers, Filament alarm, Extruder fan + more.
Glass bed with QU-BD heat pad upgrade, threadless ballscrew w/ 8mm smooth rod, spectra line belt replacement, lawsy MK5 extruder, Lawsy replacement carriage, E3D hotend, Ramps 1.4 w/ reprap discount controller, DRV8825 drivers, 12v 30A PS, Acrylic case, Overkill Y-idlers, Filament alarm, Extruder fan + more.
Re: Two Beta v2 Filastruders - $100 shipped each
The one loaded with PLA is spoken for by 2n2r5.
Re: Two Beta v2 Filastruders - $100 shipped each
I'll take the one with ABS 
Possible to ship to Vietnam ?
Thanks !
Re: Two Beta v2 Filastruders - $100 shipped each
Tim, did you sell them already?
Re: Two Beta v2 Filastruders - $100 shipped each
In the slight chance of either of these units still being available at $100, I'll take one.
Drop me a PM, and we can work out shipping/payment details to square up any shipping cost differences to get it out to Hawaii. Thanks!
Re: Two Beta v2 Filastruders - $100 shipped each
Both sold, I might have another available soon.
- Gomisan
- Member
- Offline
Re: Two Beta v2 Filastruders - $100 shipped each
Well you seem to have found the sweet spot for selling them
Re: Two Beta v2 Filastruders - $100 shipped each
Hawaii?! let's have an offline meetup!
Solidoodle2 with Ceramic tile heated bed http://www.soliforum.com/topic/2544/my- … eated-bed/
"1kg should last for an while" is a lie!
"1kg should last for an while" is a lie!
Re: Two Beta v2 Filastruders - $100 shipped each
elmoret wrote:
Both sold, I might have another available soon.
Let me know when you have another one Tim
Re: Two Beta v2 Filastruders - $100 shipped each
lalee wrote:
Hawaii
Just wanted to say aloha. Nice to see someone else from Hawaii on the forum.
SD2 w/ mods: Rumba controller, ATX PSU, SD pro case, glass bed, with more to come...
Re: Two Beta v2 Filastruders - $100 shipped each
No problem on being sold out (figured it was a long shot); just bummed I only recently came across these forums while doing some R&D.
Aloha, DigitalWhitewater. Definitely good to see others in Hawaii involved with 3D printing.
Re: Two Beta v2 Filastruders - $100 shipped each
lalee wrote:
No problem on being sold out (figured it was a long shot); just bummed I only recently came across these forums while doing some R&D.
Aloha, DigitalWhitewater. Definitely good to see others in Hawaii involved with 3D printing.
You can always pick one up through the store!
Re: Two Beta v2 Filastruders - $100 shipped each
I have two more of these, same price. Will come with everything you need, but may require some wiring and minor assembly.
- wardjr
- Moderator
- Offline
Re: Two Beta v2 Filastruders - $100 shipped each
Send it my way would ya?
Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
Re: Two Beta v2 Filastruders - $100 shipped each
Sure, one pending to wardjr.
- Serin
- Member
- Offline
Re: Two Beta v2 Filastruders - $100 shipped each
Damn... If you had one spare up for sale in about 2 weeks time could you let me know?
I'd be happy to remove it from your care.
This is a crowd funding thing that I'm running: http://www.gofundme.com/bvi140 It's for pretty selfish reasons 
Re: Two Beta v2 Filastruders - $100 shipped each
I will take number two please!