1 Topic by elmoret (edited by elmoret 2013-05-31 23:26:57)

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Topic: 15lbs filament + 8.5" wide kapton tape

I have the following for sale:

white 35oz
white 41 oz
blue 22oz
white 19oz
yellow 26oz
black 27oz
blue 29oz
black 42oz

which is over 15lbs of filament. Of course, those weights include the plastic spools, which weigh a few ounces each.

all 1.75mm, 3dprinterstuff.com or Solidoodle.

I'd like to get $125 shipped for the lot. 8 DOLLARS A POUND, SHIPPED!

I also have a roll of kapton tape, 8" wide, at least 100 feet on the roll. I'd like to get $40 shipped for it. (SOLD)

https://dl.dropboxusercontent.com/u/1786359/Photo%20May%2013%2C%2010%2052%2021%20PM.jpg

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

2 Reply by ysb

  • ysb
  • ysb
  • Member
  • Offline
  • From: quebec, canada
  • Registered: 2012-08-09
  • Posts: 1,164

Re: 15lbs filament + 8.5" wide kapton tape

you stop printing ????

Find all my 3D printable models here
Game of ropes 2 online..Adult only

ysb's Website

3 Reply by wire10ga

  • wire10ga
  • wire10ga
  • Member
  • Offline
  • From: Arkansas
  • Registered: 2012-09-14
  • Posts: 665

Re: 15lbs filament + 8.5" wide kapton tape

Likes his own stuff better I guess smile

SD2 - Glass Bed, Fans on PCB and Y motor, Custom enclosure
Slicer - Simplify3D

wire10ga's Website

4 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: 15lbs filament + 8.5" wide kapton tape

wire10ga wrote:

Likes his own stuff better I guess smile

Yup. I got all this when I picked up another SD2. No need, since I can crank out my own.

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

5 Reply by Charles_Xavier

  • Charles_Xavier
  • Member
  • Offline
  • From: Indiana
  • Registered: 2013-04-11
  • Posts: 127

Re: 15lbs filament + 8.5" wide kapton tape

This is all ABS, then?

6 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: 15lbs filament + 8.5" wide kapton tape

Charles_Xavier wrote:

This is all ABS, then?

Yup, though I have a spool of PLA I never use if you want it.

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

7 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: 15lbs filament + 8.5" wide kapton tape

Open to offers. smile

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

8 Reply by cckens

  • cckens
  • Member
  • Offline
  • Registered: 2012-09-13
  • Posts: 591

Re: 15lbs filament + 8.5" wide kapton tape

Tim,
Interested in breaking the set?
How much for the 35oz white?

9 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: 15lbs filament + 8.5" wide kapton tape

Shipping will chew up the cost - I'd rather sell it all together.

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

10 Reply by cckens

  • cckens
  • Member
  • Offline
  • Registered: 2012-09-13
  • Posts: 591

Re: 15lbs filament + 8.5" wide kapton tape

Just checking... I'm still in line with the filastruder, so it's not too hard to bear...
BTW... some of that "Use at your own risk" stuff is great... other parts are sooooo varied in diameter.

And some looks like clearance from black to natural (or maybe white)... neat to see the actual change in filament color as it progressed. smile

11 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: 15lbs filament + 8.5" wide kapton tape

cckens wrote:

Just checking... I'm still in line with the filastruder, so it's not too hard to bear...
BTW... some of that "Use at your own risk" stuff is great... other parts are sooooo varied in diameter.

And some looks like clearance from black to natural (or maybe white)... neat to see the actual change in filament color as it progressed. smile

It was never white, always natural, black, or grey. smile

Yeah that use at your own risk stuff was basically garbage to me - it was when I was doing experimental stuff. Output from the Kickstarter version is much, much more consistent.

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

12 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: 15lbs filament + 8.5" wide kapton tape

Kapton sold and shipped, bump for the filament. Let's get the gone! Open to offers.

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

13 Reply by Ramon

  • Ramon
  • Member
  • Offline
  • Registered: 2013-05-30
  • Posts: 10

Re: 15lbs filament + 8.5" wide kapton tape

Will this ship to Europe too?

- www.absplastic.eu - 3D Printing Hub

Ramon's Website

14 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: 15lbs filament + 8.5" wide kapton tape

Ramon wrote:

Will this ship to Europe too?

If you pay the difference in shipping, sure. Probably gonna cost like $100 to ship, though.

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

15 Reply by Ramon

  • Ramon
  • Member
  • Offline
  • Registered: 2013-05-30
  • Posts: 10

Re: 15lbs filament + 8.5" wide kapton tape

That wouldn't be a wise thing to do I guess tongue

- www.absplastic.eu - 3D Printing Hub

Ramon's Website

16 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: 15lbs filament + 8.5" wide kapton tape

price drop, bump

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

17 Reply by 2n2r5

  • 2n2r5
  • 2n2r5
  • Member
  • Offline
  • From: Frederick, MD
  • Registered: 2013-05-09
  • Posts: 1,208

Re: 15lbs filament + 8.5" wide kapton tape

Tim, How much now? My girl friend just got her prusa parts and needs filament for when she gets it running. PM me and we will probably take it. Also, how do I get on a waiting list for a filastruder

SD3 w/ mods:
Glass bed with QU-BD heat pad upgrade, threadless ballscrew w/ 8mm smooth rod, spectra line belt replacement, lawsy MK5 extruder, Lawsy replacement carriage, E3D hotend, Ramps 1.4 w/ reprap discount controller, DRV8825 drivers, 12v 30A PS, Acrylic case, Overkill Y-idlers, Filament alarm, Extruder fan + more.

2n2r5's Website

18 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: 15lbs filament + 8.5" wide kapton tape

$125 shipped.

Waitlist: email [email protected]

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

19 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: 15lbs filament + 8.5" wide kapton tape

Bump, someone take this stuff off my hands!

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

20 Reply by 2n2r5

  • 2n2r5
  • 2n2r5
  • Member
  • Offline
  • From: Frederick, MD
  • Registered: 2013-05-09
  • Posts: 1,208

Re: 15lbs filament + 8.5" wide kapton tape

paypal work?

SD3 w/ mods:
Glass bed with QU-BD heat pad upgrade, threadless ballscrew w/ 8mm smooth rod, spectra line belt replacement, lawsy MK5 extruder, Lawsy replacement carriage, E3D hotend, Ramps 1.4 w/ reprap discount controller, DRV8825 drivers, 12v 30A PS, Acrylic case, Overkill Y-idlers, Filament alarm, Extruder fan + more.

2n2r5's Website

21 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: 15lbs filament + 8.5" wide kapton tape

All sold!

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

22 Reply by 2n2r5

  • 2n2r5
  • 2n2r5
  • Member
  • Offline
  • From: Frederick, MD
  • Registered: 2013-05-09
  • Posts: 1,208

Re: 15lbs filament + 8.5" wide kapton tape

Got it, thanks!

SD3 w/ mods:
Glass bed with QU-BD heat pad upgrade, threadless ballscrew w/ 8mm smooth rod, spectra line belt replacement, lawsy MK5 extruder, Lawsy replacement carriage, E3D hotend, Ramps 1.4 w/ reprap discount controller, DRV8825 drivers, 12v 30A PS, Acrylic case, Overkill Y-idlers, Filament alarm, Extruder fan + more.

2n2r5's Website