1 Topic by ysb (edited by ysb 2013-05-05 13:01:10)

  • ysb
  • ysb
  • Member
  • Offline
  • From: quebec, canada
  • Registered: 2012-08-09
  • Posts: 1,164

Topic: The huntress is released !

A request from a donator... it's a little trailer as i didn't print it (waiting for a Mosfet for my RAMPS board..)..
As usual, the model will be available for free as soon as i'm sure it is printable..

http://www.soliforum.com/misc.php?action=pun_attachment&item=1822&download=0

her name is elee en' i' ravan , the eye of the forest... every goblins and every orcs that try to cross the forest of Neverwinter are terrified by her name and her familiar. her black panther 'ankaa en' i' ravan' (the fangs of the forest) is as silent as the death itself. if you think that someone or something is looking at you in your back when you travel in the neverwinter Forest, it's probably because ...someone is looking at you...
http://www.soliforum.com/misc.php?action=pun_attachment&item=1821&download=0

Post's attachments

back_huntress.jpg
back_huntress.jpg 147.82 kb, file has never been downloaded. 

face_huntress.jpg
face_huntress.jpg 145.42 kb, file has never been downloaded. 

front_huntress.jpg
front_huntress.jpg 155.65 kb, file has never been downloaded. 

side_huntress.jpg
side_huntress.jpg 214.8 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.
Find all my 3D printable models here
Game of ropes 2 online..Adult only

ysb's Website

2 Reply by frozensoda

  • frozensoda
  • frozensoda
  • Member
  • Offline
  • From: Rockford, Illinois
  • Registered: 2013-01-25
  • Posts: 202

Re: The huntress is released !

YSB You never cease to amaze me! Very nice work! Now if only I had some filament sad

I edit my posts a lot.

3 Reply by Leghk

  • Leghk
  • Leghk
  • Member
  • Offline
  • Registered: 2013-02-18
  • Posts: 172

Re: The huntress is released !

Another completely fantastic model, ysb! Well done!

Don: Folger Tech 2020 Kossel Rev A + Borosilicate + Snow Effector
        Davinci 1.0 + Repetier : Filastruder
        SD3 + RAMPS + Lawsy Carriages + E3D + Borosilicate + ... : Cupcake

4 Reply by ysb (edited by ysb 2013-04-27 11:52:29)

  • ysb
  • ysb
  • Member
  • Offline
  • From: quebec, canada
  • Registered: 2012-08-09
  • Posts: 1,164

Re: The huntress is released !

first test print.. little problem on the start of the bow and with the back of the panther... i will made some corrections and do another test print ....14h print... lt was a longggg test

http://www.soliforum.com/misc.php?action=pun_attachment&item=1856&download

Post's attachments

hunt1.jpg 189.9 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.
Find all my 3D printable models here
Game of ropes 2 online..Adult only

ysb's Website

5 Reply by ysb (edited by ysb 2013-05-05 14:53:46)

  • ysb
  • ysb
  • Member
  • Offline
  • From: quebec, canada
  • Registered: 2012-08-09
  • Posts: 1,164

Re: The huntress is released !

this is it smile the huntress is now online smile
http://www.makershop.co/shop/fantasygra … e-huntress


i took me more time that i thought to correct the problem of the bow.. but now it's ok (..yes i know... why on earth did she put her bow near this little branch... wink )

i used a little bit of extruded filament to make the bowstring that i stuck with acetone

happy printing all smile

http://www.soliforum.com/misc.php?action=pun_attachment&item=1906&download
http://www.soliforum.com/misc.php?action=pun_attachment&item=1907&download
http://www.soliforum.com/misc.php?action=pun_attachment&item=1908&download

Post's attachments

huntress_back.jpg
huntress_back.jpg 194.48 kb, file has never been downloaded. 

huntress_front2.jpg 131.84 kb, file has never been downloaded. 

screen_2013-05-05 06.13.12.jpg 205.68 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.
Find all my 3D printable models here
Game of ropes 2 online..Adult only

ysb's Website

6 Reply by DesignerFred

  • DesignerFred
  • DesignerFred
  • Member
  • Offline
  • From: France
  • Registered: 2013-03-19
  • Posts: 264

Re: The huntress is released !

Awsome work! Congradulations.... What material and settings did you use for the print, looking very refined... smile

www.designerfred.fr      before: Solidoodle 2 + E3D v6 now: MeCreator II and OLO 3D

DesignerFred's Website

7 Reply by ysb (edited by ysb 2013-05-05 17:05:45)

  • ysb
  • ysb
  • Member
  • Offline
  • From: quebec, canada
  • Registered: 2012-08-09
  • Posts: 1,164

Re: The huntress is released !

DesignerFred wrote:

Awsome work! Congradulations.... What material and settings did you use for the print, looking very refined... smile

thanks

the white is a digital render in zbrush..

for the yellow and orange one, it's standard ABS in 0.2mm layer.

Find all my 3D printable models here
Game of ropes 2 online..Adult only

ysb's Website

8 Reply by DesignerFred

  • DesignerFred
  • DesignerFred
  • Member
  • Offline
  • From: France
  • Registered: 2013-03-19
  • Posts: 264

Re: The huntress is released !

ysb wrote:
DesignerFred wrote:

Awsome work! Congradulations.... What material and settings did you use for the print, looking very refined... smile

thanks

the white is a digital render in zbrush..

for the yellow and orange one, it's standard ABS in 0.2mm layer.

Thumbs up, thanks for the response.

www.designerfred.fr      before: Solidoodle 2 + E3D v6 now: MeCreator II and OLO 3D

DesignerFred's Website

9 Reply by Randavian

  • Randavian
  • Member
  • Offline
  • Registered: 2013-01-31
  • Posts: 99

Re: The huntress is released !

ysb wrote:

this is it smile the huntress is now online smile
http://www.makershop.co/shop/fantasygra … e-huntress


i took me more time that i thought to correct the problem of the bow.. but now it's ok (..yes i know... why on earth did she put her bow near this little branch... wink )

i used a little bit of extruded filament to make the bowstring that i stuck with acetone

happy printing all smile


I was looking at the latest picture you posted and wondered how in the world you got that bow string to print so well... Lol.  I had to go back over the thread to see if you mentioned.  I'm glad you did, cause I would still be dumbfounded.  Awesome print!

10 Reply by ysb

  • ysb
  • ysb
  • Member
  • Offline
  • From: quebec, canada
  • Registered: 2012-08-09
  • Posts: 1,164

Re: The huntress is released !

thanks.. i had anticipated this question wink big_smile

Find all my 3D printable models here
Game of ropes 2 online..Adult only

ysb's Website

11 Reply by pirvan

  • pirvan
  • pirvan
  • Member
  • Offline
  • From: San Francisco
  • Registered: 2013-03-27
  • Posts: 1,797

Re: The huntress is released !

Looks great.

One thing I noticed is that you have almost no banding at all on your print.  How did you achieve such smooth print?  I tried to eliminate the banding on my prints but I'm not having any luck.

Also, what did you use to slice the model with?

To print or, 3D print, that is the question...
SD3 printer w/too many mods,  Printrbot Simple Maker Ed.,  FormLabs Form 1+
AnyCubic Photon, Shining 3D EinScan-S & Atlas 3D scanners...
...and too much time on my hands.

12 Reply by ysb (edited by ysb 2013-05-06 22:05:38)

  • ysb
  • ysb
  • Member
  • Offline
  • From: quebec, canada
  • Registered: 2012-08-09
  • Posts: 1,164

Re: The huntress is released !

yep... on the  first 140 cm, my print can kick the butt of any 0.1 layer print (with a 0.2mm layer) .. if you see the quality of the body of the panther, it is perfectly smooth

then i have banding on the last two inchs of the print... i think that when the bed is near the floor of the printer [last two inchs ], the z screw is less free to move and force the bed to move on the horizontal plane.
i also use the classic anti backlash nut..AND my z screw is one of the first model with the ABS coupler... when solidoodle send me the new 'hard' screw without coupler, the problem of wobble was a lot more horrible..

i also print at half the standard speed... it help but take a lot more time [14h print..instead of 7]..


until the last version of slic3r [0.9.9], i used kissclicer... but now i came back to slic3er as the new function [avoid crossing perimeter - in the -layer and perimeter- screen] is fantastic and help a lot for a good print..it's a pity that slic3r is a lot slower than kissclicer and a bit more sensible on the geometry quality...

Find all my 3D printable models here
Game of ropes 2 online..Adult only

ysb's Website

13 Reply by Randavian

  • Randavian
  • Member
  • Offline
  • Registered: 2013-01-31
  • Posts: 99

Re: The huntress is released !

ysb wrote:

...i also print at half the standard speed... it help but take a lot more time [14h print..instead of 7].....


When you reduced the speed rate did you have to reduce the flow rate as well?  If so, does slicer do that automatically or did you have to figure it up yourself?

Thanks

14 Reply by ysb

  • ysb
  • ysb
  • Member
  • Offline
  • From: quebec, canada
  • Registered: 2012-08-09
  • Posts: 1,164

Re: The huntress is released !

slic3r do it automatically... depending of your printer settings, you can adjust the flowrate with the second slider on the manual setting screen in real time [the first one is for the speed..]

Find all my 3D printable models here
Game of ropes 2 online..Adult only

ysb's Website

15 Reply by Randavian

  • Randavian
  • Member
  • Offline
  • Registered: 2013-01-31
  • Posts: 99

Re: The huntress is released !

ysb wrote:

slic3r do it automatically... depending of your printer settings, you can adjust the flowrate with the second slider on the manual setting screen in real time [the first one is for the speed..]


Yea, I've seen those sliders.  Just didn't know with there was another "better" way of doing it.  Also I read on here somewhere about adjusting the coding to stepper motor to adjust the flow.  I was just curious of your method.

I've yet to calibrate my flow rate.  Its pretty darn close, if not perfect, I believe... but it is on my to-do list. 

Thanks.

16 Reply by ysb

  • ysb
  • ysb
  • Member
  • Offline
  • From: quebec, canada
  • Registered: 2012-08-09
  • Posts: 1,164

Re: The huntress is released !

it's not the same think..

adjusting the coding to stepper motor is for "all days operation"

the slider are for "this time only i want a special speed/flowrate" ...

but if you are ok with your slider choice (let say "flowrate 90%") you can adjust your eeprom value at 90% for the setting to stay...

Find all my 3D printable models here
Game of ropes 2 online..Adult only

ysb's Website

17 Reply by neoblood3d

  • neoblood3d
  • neoblood3d
  • Member
  • Offline
  • Registered: 2013-06-04
  • Posts: 59

Re: The huntress is released !

I don't have my printer yet (it's in the mail LOL) but I gotta say man this is really cool stuff I appreciate you putting this out there for people.

18 Reply by ysb

  • ysb
  • ysb
  • Member
  • Offline
  • From: quebec, canada
  • Registered: 2012-08-09
  • Posts: 1,164

Re: The huntress is released !

it's my pleasure... don't forget the big orange button wink big_smile

Find all my 3D printable models here
Game of ropes 2 online..Adult only

ysb's Website

19 Reply by 2n2r5

  • 2n2r5
  • 2n2r5
  • Member
  • Offline
  • From: Frederick, MD
  • Registered: 2013-05-09
  • Posts: 1,208

Re: The huntress is released !

ysb, you on http://flattr.com/ ?

SD3 w/ mods:
Glass bed with QU-BD heat pad upgrade, threadless ballscrew w/ 8mm smooth rod, spectra line belt replacement, lawsy MK5 extruder, Lawsy replacement carriage, E3D hotend, Ramps 1.4 w/ reprap discount controller, DRV8825 drivers, 12v 30A PS, Acrylic case, Overkill Y-idlers, Filament alarm, Extruder fan + more.

2n2r5's Website

20 Reply by ysb

  • ysb
  • ysb
  • Member
  • Offline
  • From: quebec, canada
  • Registered: 2012-08-09
  • Posts: 1,164

Re: The huntress is released !

2n2r5 wrote:

ysb, you on http://flattr.com/ ?

I don't know this system.. thanks for the link.. i will look into it... and thanks again for your donation big_smile

Find all my 3D printable models here
Game of ropes 2 online..Adult only

ysb's Website

21 Reply by cod3r

  • cod3r
  • Member
  • Offline
  • Registered: 2013-06-05
  • Posts: 25

Re: The huntress is released !

Damn fine advertisement for solidoodle.