Unbiased Solidoodle review

**jamesh** · 2013-04-10 02:03:25

Hey guys, just finished a quick fairly unbiased (but positive!) review on the Solidoodle.

Check it out, and let me know if I missed anything!

**nancy** · 2013-04-10 02:18:22

Nice review! I have the problem with the backlash problem and had no idea what was causing it. Will try the backlash fix and do some reprints.

**jooshs** · 2013-04-10 02:23:41

Really great write up! Very fair assesment for the S2 which covers the majority of beginning troubleshooting issues on the S3. Only a few points.

Hair spray is also very effective and imho a no brainer immediate upgrade with a glass bed with ABS and PLA prints.

The enclosure is available for the S2, but is not heated.

Did your S2 come with an ACME leadscrew or a threaded rod?

Thanks for the write up!

**ronsii** · 2013-04-10 02:56:40

Nice writeup .... but... I kept wondering how you were going to all the fixes with a screwdriver???

Posts: 4