Solidoole 3 with RepetierHost Package doesnt work

Hello,

i received the solidoodle 3 today.
First installed software package “use the Repetier package above” from solidoodle website.
Started software and switched to red/green
Unpacking printer and plugged into power, plugged USB in and connected to PC.
Clicking connect in Repetier Host software.
Displays OK and red and green switches in software are on.
But printer does not move or heat, when clicking at manual control, neither at x- y- or z moving, nor on heating extruder.
Temperature displays always 0,0°C.

Then I installed
“Note: In some cases the drivers will not install on their own. In this case the drivers should be installed from here.”
Driver software, but does not solve anything.

23:53:54.772 : OpenGL version:1.1.0
23:53:54.773 : OpenGL extensions:GL_WIN_swap_hint GL_EXT_bgra GL_EXT_paletted_texture
23:53:54.773 : OpenGL renderer:GDI Generic
23:53:54.773 : Fast VBOs for rendering not supported. Using slower default method.
23:53:59.834 : start
23:53:59.844 : ok
23:53:59.849 : FIRMWARE_NAME:RepetierVirtualPrinter FIRMWARE_URL:#####//github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1 REPETIER_PROTOCOL:1
23:53:59.849 : ok

Look screenshot

I have Windows 7 Professional Service Pack 1

Regards
Siegfried Schwemmer

PS: I tried installation (only installation package) on other WIN7 pc, but all the same.