Android App for resetting/writing blank ntags (Page 12 of 20)

@carl_m1968,

that's not exactly correct, I have added support for regular (ogininal) and paper tags in the version 1.20

The original xyz Tags working 100% perfect.

@Razor
The paper tags working also well, but in rare cases they don't.
I have looked at the source code and found some not optimal programmed code. I guess the problems came from here.

Give me few days I will release new version then.

Thank you for your efforts I have just found the mistake!  My phone a Blackview BV6000 with NFC has apparently problems with the data processing the APP NTAG Refill Tool V.1.40 ..... read / write NFC ....... I do not know why that is.  My old cell phone Sony Xperia Z1 (display defective but with computer mouse still to use) works perfectly together with the APP.  Reads the NFC tags 213 so I can adjust color and material, then says tag again scan, and the day refill tab appears to set length still done Done.  Thank you very much for your effort

NTAG213 Stickers. Just search that term on Amazon or Ebay.

I just ordered these tags, and they worked great with the retool app:

https://www.amazon.com/Programmable-Cir … 07K6H6K43/

If you decide to look for something else, keep in mind that even if you search for "NTAG213" Amazon may show you results that are actually NTAG215s. For example, when I searched for 213 and sorted by average customer review, the top several results are 215s! So double-check that they're 213 before you order, especially if you change the sorting of your search.

NTAG 215 and 216 cards can also be used in the printer - if you know what you're doing

Nope, that's all you'll need.

Hi Everyone,

Could you please help...

System version of my da Vinci Jr 1.0 is 2.3.5

When I use the app it refills the original PCB tag from the real but then it becomes UNIDENTIFIED SPOOL !

I did the same with a paper tag - Generating a new tag but it is also read by the printer as UNIDENTIFIED SPOOL !

I guess this is because of the firmware version of 2.3.5

Can there be any solution ??

Also do not use 240 meters on new firmware anymore, only max. 200 meters working.

One more thing, sometimes if you get unidentified spool or similar massage, your Tag or PaperTag get looked (intentionally damaged) and it is not possible reuse anymore.

Hi Guys,
Many thanks for the forum and thank you for the great work of the programmers. I can finally use good filament. I have only the small mini maker with the latest firmware. I always had to print 2% larger with the original XYZ filament. With the new good filament there is no shrinkage, all dimensions fit, the element adheres well.
Short summary from tonight.
Today 10 new paper tags were bought by Ebay. A paper tags programmed with the default values of 230m and at startup an error message came and the LED blinked red. A new paper tag tested at 200m. To do this the PC is disconnected from internet and the paper tag works with the 200m setting. The mini maker prints! The next 6 hours he is printing a filament holder. The new firmware seems to be talking to xyzprinting over the internet. Unfortunately I can not downgrade the old firmware. It is always the current firmware, despite success message of the current tool, available.
Please excuse my bad English, I am a little older and with only 3 classes of English in school never properly learned and therefore use the Google translator.

Many thanks from Germany
Rainer

Damn... can't use this app. It's not scrolable or something. I have only a small screen with 480 x 800 Pixel on my Samsung phone

You can only set the tag to 200 grams max. You also cannot reset a tag that has reached zero or that the printer at some point decided the spool no longer had enough left to do a job. It will mark that one as used and cannot be reset. You should really get blank tags if you have not. That way you avoid marked serial numbers. You should also block the printer and the software from the internet in your firewall.

They need to be NTAG213, not 215.