1 Topic by CityZen

  • CityZen
  • Newbie
  • Offline
  • Registered: 2019-03-22
  • Posts: 4

Topic: Need a nozzle cap for Nobel 1.0

Does anyone have an extra nozzle cap for the XYZPrinting Nobel 1.0/1.0A that they can send me?

According to XYZ, the cap is included when you order new resin from them.  However, I just got this printer (used) without the cap, and since I've already got some resin, I'd like to try it out with what I have.  Also, XYZPrinting resin is particularly expensive.

Anyway, if you've got a spare cap that you don't need, let me know.  I can pay you for the shipping and effort.  Thanks!

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Need a nozzle cap for Nobel 1.0

CityZen wrote:

Does anyone have an extra nozzle cap for the XYZPrinting Nobel 1.0/1.0A that they can send me?

According to XYZ, the cap is included when you order new resin from them.  However, I just got this printer (used) without the cap, and since I've already got some resin, I'd like to try it out with what I have.  Also, XYZPrinting resin is particularly expensive.

Anyway, if you've got a spare cap that you don't need, let me know.  I can pay you for the shipping and effort.  Thanks!

I am just going to mention that unless you have the newer machine the resin is tagged just like their filament and the machine will not work with other resins. If it is the machine shaped like a goofy pyramid then it is the older machine that needs the tagged resin. If it is the newer machine with the uniform square body all the way up then it can use third party resin.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by CityZen

  • CityZen
  • Newbie
  • Offline
  • Registered: 2019-03-22
  • Posts: 4

Re: Need a nozzle cap for Nobel 1.0

I'm under the impression that firmware updates have opened the 1.0 model up for 3rd party resin as well.
In any case, I actually do have a bottle of XYZPrinting resin, but I don't have the nozzle cap needed to use it.