Topic: azteeg X3 with VIKI2
can anyone help me out i need an accurate list of pins for pins.H in marlin to get my VIKI2 to work with my X3?
- Tin Falcon
- Member
- Offline
Re: azteeg X3 with VIKI2
Have you looked at the panucatt support pages?? this should be at least a good starting point.
http://panucattdevices.freshdesk.com/su … stallation
Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura
Re: azteeg X3 with VIKI2
i have but i can not get the screen to work and have pined it like hte page says
4 2018-05-21 23:29:36 (edited by carl_m1968 2018-05-21 23:31:37)
- carl_m1968
- Member
- Offline
Re: azteeg X3 with VIKI2
alankluge wrote:
i have but i can not get the screen to work and have pined it like hte page says
Did you set the firmware for that screen in your configuration.h?
// The Panucatt Devices Viki 2.0 and mini Viki with Graphic LCD
// http://panucatt.com
// ==> REMEMBER TO INSTALL U8glib to your ARDUINO library folder: http://code.google.com/p/u8glib/wiki/u8glib
#define VIKI2
//#define miniVIKI
That is from my Configuration.h and as you see by my sig I am using the the X3 Pro and the Viki2.
Just do a search for Viki and you will find the lines I referenced.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
- carl_m1968
- Member
- Offline
Re: azteeg X3 with VIKI2
Tin Falcon wrote:
Have you looked at the panucatt support pages?? this should be at least a good starting point.
He has two threads on the same topic. I already pointed him to the same page since I have the same setup. An admin needs to merge both threads if possible.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
- wardjr
- Moderator
- Offline
Re: azteeg X3 with VIKI2
carl_m1968 wrote:
Tin Falcon wrote:Have you looked at the panucatt support pages?? this should be at least a good starting point.
He has two threads on the same topic. I already pointed him to the same page since I have the same setup. An admin needs to merge both threads if possible.
Merge is not something that I am able to do. Since it’s only one post could you cut and past it here. Then I’ll just delete the other one. That’s a whole lot easier than contacting Brad to have him merge the threads
Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions