Topic: E3d aero with titan
Has anyone fitted their Davinci xyz 1.0a with a e3d titan and aero package?
- yizhou.he
- Member
- Offline
Re: E3d aero with titan
https://www.thingiverse.com/thing:2473936
Not sure if it works, it is still a Work in Progress. but it will be a good start if you interested to modify and try to work it out.
P.S. I love my E3D clone!
(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
Re: E3d aero with titan
Thanks for the reply, but I would like to add this whilst retaking the existing carriage.
Someone has done this but used a volcano hot end, but I cannot find this now
- yizhou.he
- Member
- Offline
Re: E3d aero with titan
That is asking a lot. E3D titan and aero package is kind of expensive, I think most people will hesitate to try it on an compatible system. The stock carriage is not designed for E3D titan and aero, it will be difficult to fit it the package without damage the stock carriage. It is difficult enough to fit an E3D titan with stock carriage.
http://www.soliforum.com/topic/14535/e3 … -extruder/
(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1
Re: E3d aero with titan
I have it on my printer you will have to buy a volcano block to make It fit
Da Vinci AiO with firmware 1.1.1 using xyzscan 1.1.18
E3Dv6 hotend with custom carriage with Borosilicate glass bed
123D Design and Simplify3D, Replaced PS with a Solidgear Flex320
Zerokart resetter, Installed a Extruder Controller for higher temps
E3Dv6 hotend with custom carriage with Borosilicate glass bed
123D Design and Simplify3D, Replaced PS with a Solidgear Flex320
Zerokart resetter, Installed a Extruder Controller for higher temps
Re: E3d aero with titan
Thanks for your confirmation, I have a few prints to do and will give it a go.