1 Topic by Xware

  • Xware
  • Newbie
  • Offline
  • Registered: 2018-02-16
  • Posts: 2

Topic: Davinci 1.0 Repetier Homing after print./

no matter what I do I cannot get my davinci 1.0s (2 of them)  to quit homing on the Z axis  after printing..  its cruising the prints because its hitting the rails / extruder
davinci 1.0 aio

latest repetier.

printing using repetier host

slicing using slic3r

here is my end gcode

M117 Done
G92 E0 ; reset extrusion distance
M104 S0 ; turn off extruder
M140 S0 ; turn off Bed
G90 ; Absolute
G28 X0 Y0 Z180; home
M117 Down Bed
G1 Z180 ; Lower bed
M84 ; Disable motors

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Davinci 1.0 Repetier Homing after print./

Use this corrected end gcode. The issue is the sequence order.

M117 Done
G92 E0 ; reset extrusion distance
M104 S0 ; turn off extruder
M140 S0 ; turn off Bed
G90 ; Absolute
G28 Z180 ; Move Bed Down
G28 X0 Y0 ; Home XY
M84 ; Disable motors

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by yizhou.he (edited by yizhou.he 2018-02-17 14:45:23)

  • yizhou.he
  • yizhou.he
  • Member
  • Offline
  • From: Boston, MA
  • Registered: 2017-07-05
  • Posts: 1,358

Re: Davinci 1.0 Repetier Homing after print./

There are two places in repitior host to set end gcode, and if you slice with slic3r, it has its own end gcode setting, check all end gcode, depending on your settings, different end gcode is used, one of them home z axis may cause the problem.

(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1