1 Topic by OG Style

  • OG Style
  • Member
  • Offline
  • Registered: 2014-10-29
  • Posts: 21

Topic: 1.0 repetier displays REF

My printer stopped feeding in the middle of a print yesterday and I canceled the print.  I took the printer apart and cleaned the feed gear and put everything back together.  The display say "DEF" on the display for the hot end temperature, but octoprint displays what appears to be the correct temperature.  I am running repetier cf on the printer. Does anyone have any ideas why it is doing this?  I have checked all the connections.

Thanks

2 Reply by scobo (edited by scobo 2018-01-14 18:51:26)

  • scobo
  • scobo
  • Member
  • Offline
  • From: Scotland - UK
  • Registered: 2014-08-09
  • Posts: 993

Re: 1.0 repetier displays REF

If memory serves me correctly, it sounds like a thermistor and/or wiring issue.

Davinci 1.0 with repetier firmware & E3D V6 Lite
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs

3 Reply by yizhou.he

  • yizhou.he
  • yizhou.he
  • Member
  • Offline
  • From: Boston, MA
  • Registered: 2017-07-05
  • Posts: 1,358

Re: 1.0 repetier displays REF

if octoprint displays what appears to be the correct temperature but the display say "DEF" on the display for the hot end temperature, turn off power for print and wait for 1 minute and turn back on, it should display the correct temperature.

This usually happens when the themostates are disconnected for short time while machines is powered on. If this happens again without messing with hotend, you need to check thermistor wiring.

(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1

4 Reply by OG Style

  • OG Style
  • Member
  • Offline
  • Registered: 2014-10-29
  • Posts: 21

Re: 1.0 repetier displays REF

I reset it a few times and it started working correctly.  I'm going to do a test print today. Thanks for the help