1 Topic by 3d001100

  • 3d001100
  • Newbie
  • Offline
  • Registered: 2018-01-03
  • Posts: 1

Topic: DaVinvi AiO 3rd party filament problem!

Hi all!
I have been flashing the EEPROM on the filament cartridges to use 3rd party filament in my DaVinci AiO printer. But somehow the firmware on the printer got upgraded to version 1.2.3 and it doesn't recognize the cartridge anymore, it says "cartridge error unidentified cartridge".

I have not been able to find instructions on how to downgrade the firmware. Can I use the DaVinci 1.0 firmware?

Do anyone of you know how to solve this problem?

Thanks!

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: DaVinvi AiO 3rd party filament problem!

The board is a newer type from the 1.0. The 1.0 also does not have the scanner function. As for downgrading it depends on your board and your skills. If the reset jumper holes are on your board then you have chance. If not then it would take some soldering on the CPU to install a reset button to short the reset line to ground. In nutshell you are probably stuck and it would be better to convert to a RAMPS setup most likely.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by yizhou.he

  • yizhou.he
  • yizhou.he
  • Member
  • Offline
  • From: Boston, MA
  • Registered: 2017-07-05
  • Posts: 1,358

Re: DaVinvi AiO 3rd party filament problem!

http://www.soliforum.com/topic/16731/ho … updated-2/

Scanner function will be disabled for AIO if install repetier-firmware.

(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1