1 Topic by Ggalisky

  • Ggalisky
  • Ggalisky
  • Member
  • Offline
  • From: California
  • Registered: 2014-05-21
  • Posts: 487

Topic: Whose printer is this?

https://www.reddit.com/r/3Dprinting/com … _from_the/

Silicone heater pad, E3D, Smoothie board, who would throw this out?

Ulitmaker 2, a few repraps, Custom Big FFF 3D printer with heated chamber.

My Blog http://ggalisky.weebly.com/
My Youtube https://www.youtube.com/channel/UCXShYo … aDUpebDAOw

2 Reply by Tin Falcon (edited by Tin Falcon 2017-11-26 21:35:01)

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Whose printer is this?

Some people are just not meant to have printers.
IMHO a lot of ignorance going on there.
Reminds me of the guy who got frustrated with his robo 3d beat it up with a hammer threw it in the trash , Took a photo then posted a picture.

Just wrong on so many levels.

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura

3 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: Whose printer is this?

Sad really;
Given the fact that I own part of a company that makes a far superior printer.  Yet, I still own my original SD3 and a few others.  My kids still use that SD3 today.  I will never sell it much less throw it away.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website