1 Topic by diyengineer

  • diyengineer
  • Member
  • Offline
  • From: USA
  • Registered: 2013-10-18
  • Posts: 309

Topic: Dead or Alive! Looking to buy Solidoodles.

Shoot me a PM, Looking to buy, Solidoodles only. Lower price the better.

Also interested in PARTS primarily for the 2, 3, and the press.

Interested in Solidoodle 1, 2, 2 pro, 3, 4, Press, workbench, apprentice..

Thanks!!!!!!

2 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: Dead or Alive! Looking to buy Solidoodles.

Really? Maybe I have a deal for you.  We should talk PM me I'm sure we can come up with something.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

3 Reply by diyengineer

  • diyengineer
  • Member
  • Offline
  • From: USA
  • Registered: 2013-10-18
  • Posts: 309

Re: Dead or Alive! Looking to buy Solidoodles.

I'll send you a PM.

4 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: Dead or Alive! Looking to buy Solidoodles.

Yep, replied

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

5 Reply by Revolution289

  • Revolution289
  • Member
  • Offline
  • Registered: 2015-11-13
  • Posts: 40

Re: Dead or Alive! Looking to buy Solidoodles.

I have a solidoodle 2 and press send me a pm.

6 Reply by diyengineer

  • diyengineer
  • Member
  • Offline
  • From: USA
  • Registered: 2013-10-18
  • Posts: 309

Re: Dead or Alive! Looking to buy Solidoodles.

Thanks for the replies guys. At this point I am only focused on picking up SD presses in any condition. The SD2's, 3's, and 4's are still holding their value quite well (because they are great little machines for the price, I suggest selling on EBAY). If you have a press, or press parts, boards, diagrams, wire harnesses, hit me up.

Thanks.