1 Topic by origamiboy360

  • origamiboy360
  • Member
  • Offline
  • Registered: 2017-01-09
  • Posts: 14

Topic: Da Vinci Jr w 1.0 Nozzle Diameter- 0.4mm vs 0.3mm?

So there is a very strong chance that I may have to replace my nozzle, since it seems to have either jammed or reached the end of it's lifetime (if there is one) and I noticed on XYZ's site they have 2 different nozzle diameters available, being the 0.4mm and the 0.3mm. They are the same price, so i'm wondering if buying the 0.3mm is a worthy upgrade over 0.4mm if I have to replace my nozzle anyways.

TL;DR: 0.3mm nozzle or 0.4mm nozzle?

2 Reply by yizhou.he

  • yizhou.he
  • yizhou.he
  • Member
  • Offline
  • From: Boston, MA
  • Registered: 2017-07-05
  • Posts: 1,358

Re: Da Vinci Jr w 1.0 Nozzle Diameter- 0.4mm vs 0.3mm?

Print with 0.3mm nozzle is a lot slower, and stick to bed not as good. if these two is not a concern, go for it. I print large low resolution stuff most of the time, swith to 0.3mm seems to be downgrade to me.

(Da Vinci 1.0, Jr. 1.0 RAMPS, miniMaker) X4, (Creality CR-10S, CR-10 mini, Ender-3) X4, Anycubic MEGA X4, Anycubic Chrion X1, ADMILAB Gantry X2 (MonoPrice Maker Select V2, Plus, Ultimate)X4--Select mini X1, Anycubic photon X4, Wanhao duplicate D7 X1.
iNSTONE Inventor Pro X2, CTC Dual X2, ANET-A8, Hictop 3DP-11, Solidoodle Press, FLSUN I3 2017X1