1 Topic by kellysintrouble3

  • kellysintrouble3
  • Newbie
  • Offline
  • Registered: 2017-04-17
  • Posts: 6

Topic: not so new topic with my xyz da vinci 2.0A duo Calibration!!

here with my xyz da vinci 2.0A duo.
two days and  I still get err err err .
I have used JOG and it doesn't help.
About all I can do is nozzel cleaning.  Is it really this hard to Calibrate the duo?
thank you for any help.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: not so new topic with my xyz da vinci 2.0A duo Calibration!!

Dont use the built in method. Use the manusl method that is stickied in the XYZ section. The built in cal actually sets the height to the wrong values anyways.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by kellysintrouble3

  • kellysintrouble3
  • Newbie
  • Offline
  • Registered: 2017-04-17
  • Posts: 6

Re: not so new topic with my xyz da vinci 2.0A duo Calibration!!

I will give it a go....thanks!