1 Topic by plantman47

  • plantman47
  • Newbie
  • Offline
  • Registered: 2017-02-26
  • Posts: 2

Topic: Da Vinci 1.0A w/E3Dv6 heater power failure

The 2 pin 12V power for the heater cartridge reads millivolts or no voltage while powered, and the LCD panel doesn't power on at all. I'm using repetier with the web control panel, so I can live without the LCD for now. What I am asking is, does anyone know anywhere else on the board to get 12V 30W power for the heater cartridge? I'm looking to bypass the current connector as a component failure fried it but has since been rectified.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Da Vinci 1.0A w/E3Dv6 heater power failure

There is no place else that is controlled. Your best option now is to do the RAMPS upgrade.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.