1 Topic by n.tracy333

  • n.tracy333
  • Newbie
  • Offline
  • Registered: 2017-03-11
  • Posts: 1

Topic: Power supply and heat bed

Hello everyone, I'm working on switching my Davinci 1.0 pro  mother board with an arduino mega and ramps1.4. My question is where do the four wires from the heatbed and the four from the power supply go on the ramps board. I've measured them and it looks like one pair(meaning 2 out of the four wiires on the PS, the yellow and black) runs 12v and the other runs 5vv, and I believe the head bed is the same. I also see no instruction on where to plug in the two black wires from the HB. Any and all help much appericated.

Post's attachments

IMG_20170309_121459_hdr.jpg 655.87 kb, file has never been downloaded. 

IMG_20170311_005856.jpg
IMG_20170311_005856.jpg 636.87 kb, file has never been downloaded. 

You don't have the permssions to download the attachments of this post.

2 Reply by Tin Falcon

  • Tin Falcon
  • Tin Falcon
  • Member
  • Offline
  • From: New Jersey, USA
  • Registered: 2014-08-01
  • Posts: 2,424

Re: Power supply and heat bed

http://www.reprap.org/mediawiki/images/ … ossier.pdf

Soliddoodle 4 stock w glass bed------Folger Tech Prusa 2020 upgraded to and titan /aero extruder mirror bed
FT5 with titan/ E3D Aero------MP mini select w glass bed
MP Utimate maker pro-W bondtech extruder
Marlin/Repetier Host/ Slic3r and Cura