1 Topic by HyruleJedi86

  • HyruleJedi86
  • Member
  • Offline
  • Registered: 2015-05-11
  • Posts: 113

Topic: Davinci Jr and Simplify 3D

I just recently found out that Simplify 3D has started supporting the Davinci Jr 1.0. I have this version and the firmware is still low enough to allow me to reset filament. I'm pretty close to making this a more open printer with these things. But I am still learning about Simplify 3D and was wondering if anyone has been using Simplify 3D with the Jr and can help me with settings because currently I can't print with any files coming from Simplify 3D. They seem to underextrude and not stick to the bed. That's as far as I've gotten.

Thanks!

2 Reply by Pepo

  • Pepo
  • Newbie
  • Offline
  • Registered: 2016-03-11
  • Posts: 8

Re: Davinci Jr and Simplify 3D

Can you export your printer profile and it with us?

3 Reply by theanderpp

  • theanderpp
  • Newbie
  • Offline
  • Registered: 2016-04-23
  • Posts: 5

Re: Davinci Jr and Simplify 3D

This is the profile I've been using on my Junior. Works perfect for me.

https://mega.nz/#!UnwzzK6a!p1WdPw4oqTAS … IQN2o53_pE

4 Reply by HyruleJedi86

  • HyruleJedi86
  • Member
  • Offline
  • Registered: 2015-05-11
  • Posts: 113

Re: Davinci Jr and Simplify 3D

This is the profile I have for the Jr. Hopefully I exported it right:
https://www.dropbox.com/s/uf8ke8wpblg7g … 0.fff?dl=0

5 Reply by Pepo

  • Pepo
  • Newbie
  • Offline
  • Registered: 2016-03-11
  • Posts: 8

Re: Davinci Jr and Simplify 3D

theanderpp wrote:

This is the profile I've been using on my Junior. Works perfect for me.

https://mega.nz/#!UnwzzK6a!p1WdPw4oqTAS … IQN2o53_pE


This profile is the official one?

6 Reply by Pepo

  • Pepo
  • Newbie
  • Offline
  • Registered: 2016-03-11
  • Posts: 8

Re: Davinci Jr and Simplify 3D

Did you tried to use 10mm of skirt?

7 Reply by theanderpp

  • theanderpp
  • Newbie
  • Offline
  • Registered: 2016-04-23
  • Posts: 5

Re: Davinci Jr and Simplify 3D

It's not the official profile. But it works for me on my Jr.

8 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Davinci Jr and Simplify 3D

Pepo wrote:
theanderpp wrote:

This is the profile I've been using on my Junior. Works perfect for me.

https://mega.nz/#!UnwzzK6a!p1WdPw4oqTAS … IQN2o53_pE


This profile is the official one?


There would be no official profile. Regardless of brand or model every machine is different due to manufacturing and part variations. The best you can do is get a base profile that sort of works and then tune it to your specific machine. 3D printing is no where near plug and play yet regardless of advertising hype. You will still need to some tuning and tinkering to get them to work.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

9 Reply by Magic Matt

  • Magic Matt
  • Member
  • Offline
  • Registered: 2017-12-30
  • Posts: 35

Re: Davinci Jr and Simplify 3D

Came across this thread white searching. As far as I can tell, the Junior now requires 3w files, bit that profile doesn't make them. Not having my own copy of S3D to try I couldn't do anything other than ask a friend who had to try the profile and send me the resulting file. He sent me a gcode file, which didn't work.

Die S3D allow saving to the SD card and printing when you have the latest firmware, or is it only by USB?

I'm a total newcomer to 3D printing, based in the UK, and have a DaVinci Junior 1.0
My background is programming, web design, and vinyl cutting!

10 Reply by mjf55

  • mjf55
  • Member
  • Offline
  • From: Raleigh, NC
  • Registered: 2017-06-01
  • Posts: 336

Re: Davinci Jr and Simplify 3D

Magic Matt wrote:

Came across this thread white searching. As far as I can tell, the Junior now requires 3w files, bit that profile doesn't make them. Not having my own copy of S3D to try I couldn't do anything other than ask a friend who had to try the profile and send me the resulting file. He sent me a gcode file, which didn't work.

Die S3D allow saving to the SD card and printing when you have the latest firmware, or is it only by USB?

The Jr always required 3W files.  I have firmware 2.2.7 and print by saving to sdcard.  In order to save a S3D sliced object for the Jr, ( assuming you ( or your friend ) has the XYZ Printing JR FFF file follow thee procedure in this thread http://www.soliforum.com/topic/16581/ho … -and-print