1 Topic by DA VINCI

  • DA VINCI
  • Newbie
  • Offline
  • Registered: 2016-06-22
  • Posts: 8

Topic: some help with marlin please

hi everyone


i have a Bulldog XL extuder from reprapdiscount and trying to update marlin it says to change the steps per unit to 495
were do i put the change at the 103.0 in the marlin code.


#define DEFAULT_AXIS_STEPS_PER_UNIT   {80.00,80.00,4000,103.0}  //

any help please

2 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: some help with marlin please

Yep,
In order that's X,Y,Z&E
Also if using Repetier-Host you can simply change that in EEPROM .vs flashing the firmware.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

3 Reply by DA VINCI

  • DA VINCI
  • Newbie
  • Offline
  • Registered: 2016-06-22
  • Posts: 8

Re: some help with marlin please

wardjr wrote:

Yep,
In order that's X,Y,Z&E
Also if using Repetier-Host you can simply change that in EEPROM .vs flashing the firmware.

thank you ward jr