Topic: temple guardian figurine
another heroic fantasy statue from my test stock
you can get it from here :
http://www.thingiverse.com/thing:49103
this one is supportless so have fun.. 
and can be print full size in a S2
- ysb
- Member
- Offline
Re: temple guardian figurine
Dang, ysb, that's sexy... is that at .1mm?
3 2013-02-11 18:04:20 (edited by ysb 2013-02-11 18:08:09)
- ysb
- Member
- Offline
Re: temple guardian figurine
thanks, it's only a 0.2mm layer with no finishing... actually i have a problem of banding that just appear from nowhere and i need to resolve it before going further... but i think that 0.1mm layer is just a waste of time apart for very specific model...
0.2mm is a very good compromise between speed and quality
i printed two of this model, one of 120mm and another of 140mm... i will put the 120mm one in my "aceton gaz station" to see the result for this specific model..
for this model at 0.2../ 140mm height/ 0.15% filling , it take something like 5 hours to print...
4 2013-02-22 21:36:12 (edited by nickythegreek 2013-02-22 21:52:28)
Re: temple guardian figurine
Neat print ysb! This is my first real print sliced in kisslicer.
I let this lady print while I went to work today.
Kisslicer settings: .2 / 120mm / 15% infill / skin thickness .42mm
Octave Gold filament
Printing time: 3h:01m:14s
Most of these inconsistencies in the final print are visible in the RH gcode view (where did these little messes come from?)
- ysb
- Member
- Offline
Re: temple guardian figurine
sorry.. i just see your post... nice print.. this gold filament is very nice..
for the inconsistencies, it's a bonus of kisslicer... don't know why it do this this... (and it's not only on my model..)