1 Topic by PrinterNinja

  • PrinterNinja
  • Newbie
  • Offline
  • Registered: 2014-05-23
  • Posts: 5

Topic: Manual leveling on the Da Vinci Pro

Hi,

I'd like to ask for some feedback about a video I just posted on YouTube. I'll say right up front that the purpose of the video is to demonstrate (and thereby indirectly promote) the Zebra Skin build surface (which my company sells), but part of the video explains how to manually level the bed. I'd just like to get some feedback about the process I used in case there is anything that I can improve or correct.

I appreciate any feedback you care to share. Good or bad.

Thanks,
Wayne Huthmaker
PRINTinZ

2 Reply by artanangus (edited by artanangus 2016-04-09 17:15:54)

  • artanangus
  • artanangus
  • Member
  • Offline
  • From: Salt Lake City, Utah
  • Registered: 2015-11-22
  • Posts: 32

Re: Manual leveling on the Da Vinci Pro

Informative video, it is a bit long to read in frames. you answered my questions in the video, the way the script wrote, was similar to the way I was thinking about questions, especially about using the tape. almost like you were inside my head. Made sense once it was explained.
IMO, the video did a good job, images were clear, lighting and focus clean, it explained how to apply the product, some technique on leveling, and care of the product, where you can get more product info for purchase.
It enticed me enough that I went to the webpage.

Good job.