1 Topic by jamerfut

  • jamerfut
  • Member
  • Offline
  • Registered: 2015-05-06
  • Posts: 51

Topic: re: repetier .92 davinci 10.A

Hi Guy's
I am trying to calibrate my 10. A printer running repetier .92 so i am adjusting the steps per MM and printing a 10 mm x 10mm x 10 MM square cube and no matter what i make the setting's in the step per mm it dosen't change the size of the cube any help on this is greatly appreciated
Thanks

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: re: repetier .92 davinci 10.A

jamerfut wrote:

Hi Guy's
I am trying to calibrate my 10. A printer running repetier .92 so i am adjusting the steps per MM and printing a 10 mm x 10mm x 10 MM square cube and no matter what i make the setting's in the step per mm it dosen't change the size of the cube any help on this is greatly appreciated
Thanks


You have to disable the EEPROM storage in the firmware or open Repetier host and make your changes in the EEPROM window. By default Repetier firmware stores your initial settings in EEPROM if you don't disable the setting before flashing.

Once stored those values will override all other values in the firmware.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by jamerfut

  • jamerfut
  • Member
  • Offline
  • Registered: 2015-05-06
  • Posts: 51

Re: re: repetier .92 davinci 10.A

Thanks Carl for the reply
so i don't understand i have made changes to temp and x& y home cordinates to print in the center of the bed and did not have to disable anything are you saying i have to make the changes in the firmware and then re-flash the E-prom

Thanks