1 Topic by pauljacobdegroot (edited by pauljacobdegroot 2016-02-22 01:58:21)

  • pauljacobdegroot
  • Member
  • Offline
  • Registered: 2015-03-19
  • Posts: 22

Topic: Retrieving the scan from Atlas

It took me a while how to retrieve it when not being connected to the Lan/WiFi since it seems it is assumed everyone knows it (when connected to Lan/Wifi you just click on the scan name to down it via the browser).

The scans made via Atlas3D are being stored in the Pi at: /var/bin/library/freelss/scans

and how to get them of the Pi onto your laptop or PC: Download FreeZillaFTP client and connect with the Pi via SFTP. For instructions see here: http://trevorappleton.blogspot.com.au/2 … -your.html

Hope I saved you some time here (in case you don't have the pi connected to your lan or wifi) smile

Atlas3D scanner, Reprap Prusa i2 3D printer

2 Reply by bobswika

  • bobswika
  • Member
  • Offline
  • Registered: 2015-12-27
  • Posts: 71

Re: Retrieving the scan from Atlas

It much easier than that if you use the web interface.  You have the option there to view or save your scans.

http://soliforum.com/i/?JDr1Uqc.jpg

3 Reply by pauljacobdegroot

  • pauljacobdegroot
  • Member
  • Offline
  • Registered: 2015-03-19
  • Posts: 22

Re: Retrieving the scan from Atlas

Yes when connected via a browser, it is very easy smile

Atlas3D scanner, Reprap Prusa i2 3D printer

4 Reply by n2ri

  • n2ri
  • Member
  • Offline
  • From: St Louis MO USA area
  • Registered: 2013-02-03
  • Posts: 2,539

Re: Retrieving the scan from Atlas

how else would you connect?

Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs

5 Reply by n2ri

  • n2ri
  • Member
  • Offline
  • From: St Louis MO USA area
  • Registered: 2013-02-03
  • Posts: 2,539

Re: Retrieving the scan from Atlas

plug Ethernet cable from Pi to your router or? still slow video streaming but better other data

Solidoodle 2 with Deluxe kit cover & glass bed with heater. and 2nd board SD2 used not 3rd and alum platform not installed yet still wood. also need cooling fan installed to board. use Repetier Host couple vers. Slic3r also have all free ware STL programs