1 Topic by dext0rb (edited by dext0rb 2016-01-19 23:52:29)

  • dext0rb
  • Newbie
  • Offline
  • Registered: 2016-01-08
  • Posts: 6

Topic: DaVinci 1.0A leadscrew pitch?

Does anyone know what pitch this screw is? No matter what I Google, I can't find this info out and it's kind of a pain to get back there to measure it.

1.25mm?

Felix 3
DaVinci 1.0A w/ Repetier .92

2 Reply by dext0rb

  • dext0rb
  • Newbie
  • Offline
  • Registered: 2016-01-08
  • Posts: 6

Re: DaVinci 1.0A leadscrew pitch?

halp?

Felix 3
DaVinci 1.0A w/ Repetier .92

3 Reply by evanalmighty

  • evanalmighty
  • Member
  • Offline
  • Registered: 2015-01-04
  • Posts: 224

Re: DaVinci 1.0A leadscrew pitch?

I'm guessing it's M8 screw with 2mm pitch

4 Reply by chrismu

  • chrismu
  • Newbie
  • Offline
  • Registered: 2016-02-03
  • Posts: 1

Re: DaVinci 1.0A leadscrew pitch?

I'm pretty sure it is M8, 1.25mm pitch.  I measured the diameter with a caliper.  8mm.  I pushed a piece of paper onto the rod, which left a little imprint and some oil/grease.  Then I measured that with a caliper, and the pitch is 1.25mm.  According to wikipedia that is the pitch for coarse threads on an M8.