1 Topic by crazyewok

  • crazyewok
  • Member
  • Offline
  • Registered: 2015-10-27
  • Posts: 11

Topic: XYZ default settings for slic3r

Just wondering what the default settings for a XYZ 1.0 AIO  printing at 0.1mm on slow speed is if I was to to put into slic3cr? 

Mainly speed and retraction settings?

Cant seem to find out anywere.

Want to put the default settings in then adjust from there.

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: XYZ default settings for slic3r

There is no such thing as default settings. Every printer is different and every roll of filament is different. The settings will change every time you load a new roll. Even the same color by the same vendor will be different from the last.

That is part of the printing process is to find the optimal settings for your machine and filament. Somebody might could give you some numbers but they will only get you in the ball park. I sold my Da Vinci so I don't have numbers to give you.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by crazyewok

  • crazyewok
  • Member
  • Offline
  • Registered: 2015-10-27
  • Posts: 11

Re: XYZ default settings for slic3r

I thought the stock XYZ software used fixed settings?

4 Reply by scobo

  • scobo
  • scobo
  • Member
  • Offline
  • From: Scotland - UK
  • Registered: 2014-08-09
  • Posts: 993

Re: XYZ default settings for slic3r

I seem to remember the slow setting being 30mm/s but I could be wrong (no longer using xyz).
That's actually the speed I use when I want to print fast.

Davinci 1.0 with repetier firmware & E3D V6 Lite
Anycubic Photon DLP printer, Einscan-S 3D scanner
Simplify3d, 123D Design, Meshmixer
http://www.thingiverse.com/scobo/designs