1 Topic by JammerX19

  • JammerX19
  • Member
  • Offline
  • Registered: 2014-06-17
  • Posts: 13

Topic: Repetier-Host for S2?

Having to rebuild my workstation here, and I have a Solidoodle 2 Pro.  I now use Octoprint for my printer but I want to install Repetier-Host and Slic3r on this machine like I had before.  Trouble is, I think I downloaded it from solidoodle.com and it was all pre-configured for the S2, and now I can't find it on their site.  Any suggestions on what to do next?

2 Reply by wardjr

  • wardjr
  • wardjr
  • Moderator
  • Offline
  • From: Minnesota
  • Registered: 2013-06-10
  • Posts: 5,624

Re: Repetier-Host for S2?

Create your own profiles.
Download RH and just enter the information you know and ask about the rest.

Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions

wardjr's Website

3 Reply by JammerX19

  • JammerX19
  • Member
  • Offline
  • Registered: 2014-06-17
  • Posts: 13

Re: Repetier-Host for S2?

I did find (after some digging) the recommended S2 settings for RH and got it working, thanks.

4 Reply by mbarr

  • mbarr
  • Newbie
  • Offline
  • Registered: 2014-11-22
  • Posts: 5

Re: Repetier-Host for S2?

Repetier Host settings for Solidoodle 2 on connection tab are:
a. Port: Select the Port designated for your printer
b. Baud Rate: 250,000
c. Stop Bits: 1
d. Parity: None
e. Transfer Protocol: Auto
f. Receive Cache Size: 63
g. Use PingPong Communication: Leave Unchecked

6) Select the Printer Shape Tab. Like The connection tab, once set, you shouldn’t have to mess with the values again. The appropriate values and example are again listed below.
a. Print Area Width: 159mm Home X: Max
b. Print Area Depth: 150mm Home Y: Max
c. Print Area Height: 150mm Home Z: Min
d. Has Dump Area CHECK
e. Dump Area Left: 150
f. Dump Area Front: 0
g. Dump Area Width: 9
h. Dump Area Depth: 150
i. X Min: 0 X Max: 159 Bed Left: 0
j. Y Min: 0 Y Max: 159 Bed Front: 0

Solidoodle 2 Repetier Host instruction in jpg is attached

Post's attachments

repetierinstructions.pdf 670.75 kb, 5 downloads since 2016-04-08 

You don't have the permssions to download the attachments of this post.