1 Topic by Manx

  • Manx
  • Member
  • Offline
  • Registered: 2012-09-25
  • Posts: 524

Topic: changing back to original

Since i updated my firmware my printer hasn't been working correctly

is there a way to go back to the original firmware?

2 Reply by smbenson

  • smbenson
  • Newbie
  • Offline
  • Registered: 2015-12-10
  • Posts: 3

Re: changing back to original

If you install one of the original xyz software packages found here (download from http://voltivo.com/forum/davinci-softwa … epository) you can use xyz firmware upgrade in about to downgrade the firmware.  Just disconnect from the internet and it will prompt you to look for the bin file of the firmware you want to downgrade to.  Download the firmware from the same site above.

3 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: changing back to original

smbenson wrote:

If you install one of the original xyz software packages found here (download from http://voltivo.com/forum/davinci-softwa … epository) you can use xyz firmware upgrade in about to downgrade the firmware.  Just disconnect from the internet and it will prompt you to look for the bin file of the firmware you want to downgrade to.  Download the firmware from the same site above.


Did you try this with the newest firmware? All the reports I am hearing say the newest cannot be reverted.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.