Topic: need sd card stock file, da vinci aio all in one
Does someone have the file one the da vinci 1.0 aio 3d printer, like to check my sd card, been changing firmware and want to double check my card, please help [email protected]
Re: need sd card stock file, da vinci aio all in one
Do you need the copy for the current firmware?
Da Vinci AiO with firmware 1.1.1 using xyzscan 1.1.18
E3Dv6 hotend with custom carriage with Borosilicate glass bed
123D Design and Simplify3D, Replaced PS with a Solidgear Flex320
Zerokart resetter, Installed a Extruder Controller for higher temps
E3Dv6 hotend with custom carriage with Borosilicate glass bed
123D Design and Simplify3D, Replaced PS with a Solidgear Flex320
Zerokart resetter, Installed a Extruder Controller for higher temps
Re: need sd card stock file, da vinci aio all in one
Well i messed around with the firmware, and trying to get it back to stock, keeping a 011 error wont calibrate or heat up, i screwed something up, just trying to check everything.
Re: need sd card stock file, da vinci aio all in one
Well I have firmware 1.1.1 I don't know if it would help but I can email it to you.
Da Vinci AiO with firmware 1.1.1 using xyzscan 1.1.18
E3Dv6 hotend with custom carriage with Borosilicate glass bed
123D Design and Simplify3D, Replaced PS with a Solidgear Flex320
Zerokart resetter, Installed a Extruder Controller for higher temps
E3Dv6 hotend with custom carriage with Borosilicate glass bed
123D Design and Simplify3D, Replaced PS with a Solidgear Flex320
Zerokart resetter, Installed a Extruder Controller for higher temps
Re: need sd card stock file, da vinci aio all in one
please email [email protected] anything special i need to do to install it??? thank you i feel like a stupid shit for screwing with it in the first place. really like what you have done to yours, Regards Robert
Re: need sd card stock file, da vinci aio all in one
Thanks, I don't think there is anything special you have to do, I'm guessing that you would just copy to your cars and see what happens. I will email as soon as I get home.
Da Vinci AiO with firmware 1.1.1 using xyzscan 1.1.18
E3Dv6 hotend with custom carriage with Borosilicate glass bed
123D Design and Simplify3D, Replaced PS with a Solidgear Flex320
Zerokart resetter, Installed a Extruder Controller for higher temps
E3Dv6 hotend with custom carriage with Borosilicate glass bed
123D Design and Simplify3D, Replaced PS with a Solidgear Flex320
Zerokart resetter, Installed a Extruder Controller for higher temps
Re: need sd card stock file, da vinci aio all in one
what you mean my cars?? dont understand sorry
- carl_m1968
- Member
- Offline
Re: need sd card stock file, da vinci aio all in one
He means card... Probably typing on a phone.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Re: need sd card stock file, da vinci aio all in one
ok thank you
Re: need sd card stock file, da vinci aio all in one
Do you think that, Da Vinci AiO with firmware 1.1.1 is working the best for this printer??? if so where did you find it, can i ask?? Question, by flashing my printer, did i mess something up on my sd card?? any ideas
Re: need sd card stock file, da vinci aio all in one
kb9asu wrote:
Do you think that, Da Vinci AiO with firmware 1.1.1 is working the best for this printer??? if so where did you find it, can i ask?? Question, by flashing my printer, did i mess something up on my sd card?? any ideas
This is the original firmware, was about to upgrade and I was reading on this forum I kept seeing "don't upgrade" so I didn't. Right now I'm using this firmware with xyzscan 1.1.18 and my scan are coming out pretty good. I'm sending you the files but I am unable to send the gcode files.
Da Vinci AiO with firmware 1.1.1 using xyzscan 1.1.18
E3Dv6 hotend with custom carriage with Borosilicate glass bed
123D Design and Simplify3D, Replaced PS with a Solidgear Flex320
Zerokart resetter, Installed a Extruder Controller for higher temps
E3Dv6 hotend with custom carriage with Borosilicate glass bed
123D Design and Simplify3D, Replaced PS with a Solidgear Flex320
Zerokart resetter, Installed a Extruder Controller for higher temps
Re: need sd card stock file, da vinci aio all in one
Sure wish i would have done my home work like you, Kevin
Re: need sd card stock file, da vinci aio all in one
checked my printer and it say running 1.2.7 firmware seems not to be alot of info out there on the 1.0 aio printer, sorry but still just a bit confused here, i want to flash the printer and install the best firmware and have the correct files on the sd card, having a hard time. what firmware do i flash with that i dont screw up my scanner?