Topic: Severed Extruder Heatwires
Accidentally tore off the heatwires with the brush.
Tried resoldering but the wires are too deep in the head to grab on to.
What do you guys think?
Drill, buy a new head from DaVinci or buy a third party head?
Re: Severed Extruder Heatwires
If memory serves that's a 6mm heater cartridge.
Re: Severed Extruder Heatwires
Great, Thanks!
- carl_m1968
- Member
- Offline
Re: Severed Extruder Heatwires
You might be brushing a little too aggressively if you are breaking those wires. You should use the brush only when the head is hot, but not while power is applied to the heater.
Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.
5 2015-09-06 09:21:22 (edited by mrtjahzi 2015-09-06 09:22:39)
Re: Severed Extruder Heatwires
I've purchased these:
http://www.ebay.com/itm/121426718820?_t … EBIDX%3AIT
Ridiculously cheap. Much to my surprise, this actually worked.
Looked at some threads around here and these reprap heat cartridges saved my printer.
Let's get crackin' again.