Can you post some photos of how you do recycling? How do you prepare the plastic?

Ok en este momento no tengo las fotos pero tomaré algunas y las subo después
, el proceso es sencillo pero de paciencia primero corto los sobrantes en pequeños trozos entre 5 y 6 mm con una cortadora de mano  y luego los pongo en una licuadora para hacerlos ma´s pequeños los pedazos más grandes hay que picarlos con la cortadora pero lo que es material de soporte y raf la licuadora los corata facilmente

(Ok En Este Momento no tengo las fotos Pero Tomare algunas y las subo despues
, Con El proceso es sencillo pero de paciencia Primero corto los Sobrantes en pequeños Trozos Entre 5 y 6 mm Con Una cortadora de mano y LUEGO los pongo En Una licuadora párrafo hacerlos ma's pequeños los Pedazos Mas Grandes heno Que picarlos Con La cortadora Pero he aquí Que el material es de Soporte y raf la licuadora los Corata facilment)

To increase the capacity you can run the motor on 15 volts, but you should put a fan on it to keep it cool. You can also try the beta motor, which spins faster.

Gracias Elmoret, creo que tendre que pedir uno de esos filtros, el problema que para traer cosas a Costa Rica todo sale muy caro por los impuestos, pero voy a ver que hago.

(Elmoret Thanks, I think I'll have to order one of these filters, the problem to bring all things Costa Rica is very expensive for the taxes, but I do see that.)

Una pregunta es posible pedir solo algunas de las partes como el motor, el control, y los cables, pregunto es posible usar un tubo más grueso y una broc a mas gruesa. para montrar un filastruder con mas capacidad.

(A question is only possible to order some of the parts like the engine, control, and cables, wonder is possible to use a thicker tube and a thicker brooch. montrar filastruder for one with more capacity.)

http://www.soliforum.com/topic/7551/che … -diy-1418/

You're shooting for a filter of about 250 microns or less. Maybe you can use mechanical pencil lead to check the size:

http://www.amazon.com/Staedtler-Marsmic … words=.3mm

They come in 0.3mm (300 microns), so if it passes through the screen, the screen is too big.

(Elmoret Thanks, I think I'll have to order one of these filters, the problem to bring all things Costa Rica is very expensive for the taxes, but I do see that.)

I'll let some pictures for you to know, I have only one problem that even I do not figure is that often I contamin the filament with small metal shavings or powder room, but I've been recycling all the material I have left the raf and media objects and some objects that were not well are now converted to strand another look

http://www.filastruder.com/collections/ … elt-filter

A melt filter is especially important when recycling, but a good idea when producing filament to be used in a3d printer that has a nozzle 0.5mm or smaller.

English
(Hi friends after several months battling my filastruder now is working pretty well,
I have customized my own taste, I'll let some pictures for you to know, I have only one problem that even I do not figure is that often I contamin the filament with small metal shavings or powder room, but I've been recycling all the material I have left the raf and media objects and some objects that were not well are now converted to strand another look, and what I do is put some virgin pellets to regain strength plastic, so far I've only worked with ABS, I think I'll need another filastuder to recycle leftover PLA.
They can comment me your opinion and are grateful)