<![CDATA[SoliForum - 3D Printing Community — install issue with Repetier V0.95F]]> https://www.soliforum.com/topic/5244/install-issue-with-repetier-v095f/ Fri, 31 Jan 2014 00:36:40 +0000 PunBB <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/48279/#p48279 I'm no expert but don't you need to uncheck hide travel up top?

]]> Fri, 31 Jan 2014 00:36:40 +0000 https://www.soliforum.com/post/48279/#p48279 <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/48277/#p48277 This is what I see.

]]> Fri, 31 Jan 2014 00:33:06 +0000 https://www.soliforum.com/post/48277/#p48277 <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/48195/#p48195 satman49 wrote:

Another issue I have with win 8 is, on the manual tab it doesn't show the visual printing progress(all versions of RH).It works ok in win xp tho

Works fine here, as long as RH is the active foreground app. When its backgrounded or non-active, it doesn't continue plotting the OpenGL stuff... but it updates to its present position the moment its back in the foreground.

My experience on Win8.1 x64 anyway...

]]> Thu, 30 Jan 2014 01:30:47 +0000 https://www.soliforum.com/post/48195/#p48195 <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/48167/#p48167 Another issue I have with win 8 is, on the manual tab it doesn't show the visual printing progress(all versions of RH).It works ok in win xp tho

]]> Wed, 29 Jan 2014 22:15:41 +0000 https://www.soliforum.com/post/48167/#p48167 <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/47863/#p47863 the solution is here :

http://www.soliforum.com/topic/5270/pro … windows-8/


sorry.. you need to translate it... it's not a probleme of repetier host version, it's a problem of win8

Asdesas wrote:

....

Donc le premier soucis que j'ai eu est le port (COM3 par défaut n'était pas bon).

Pour règler cela: vas à droite de l'écran avec ta souris
- rechercher "device manager"
- cliquer sur "mettre à jour les pilotes de périphérique"
- puis dans l'onglet Ports (COM et LPT).

Une fois la iste de port ouverte tu dois clic droit sur le port concerné (moi c'était USB Serial Port (COM3) )

- cliquer sur " mettre à jour le pilote "
- puis  "rechercher un pilote sur mon ordinateur "
- "choisir une liste de pilotes de périphériques sur mon ordinateur
- sélectionner le bon dans la liste (pour moi "USB serial port")
- faire suivant, et si tu as le message disant que c'est ok, tu dois redemarrer ton ordi.

La première fois ça n'a pas marché pour moi (2ième problème mais perso pour moi celui la) j'ai dufaire un clic droit sur le port à changer - propriété - paramètres du port - cliquer sur "avancé" et changer le numéro du port (j'ai mis COM12, je sais pas pourquoi).
Refaire toute l'étape du dessus,

- redémarrer Repetier Host
-Réglages imprimantes et pour la donnée "port" mettre le nouveau "COM" (pour moi COM12) et bien mettre la vitesse sur 250000.

...

]]> Mon, 27 Jan 2014 13:38:52 +0000 https://www.soliforum.com/post/47863/#p47863 <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/47686/#p47686 Alright Might I went through every iteration of Repetier and .85b, .90c and .95f all work on my windows 7 machine and only thing I had to change to get it to work with .90c and .95F was the reset on connect had to be set to disable.  I even have all 3 versions installed in separate directories on my system.

I was reading however that there seems to be a problem with WIN 8 and installs.  One link I was reading on reprap forum was stating that with Wn 8 you needed to do a complete uninstall an reinstall the newer version but the uninstall does not remove all the Registry keys like it should and you have to manually go in and remove the entry "HKEY_CURRENT_USER\Software\repetier"

However... Before you go that route I would try the following.  I will have a win 8 laptop installed in a couple of hours and I will test also from this side.
1. Disable Reset on connect...
2.  try running RH .95F in compatibility mode http://www.dummies.com/how-to/content/h … ows-8.html
3. Can you get your hands on a WIN7 machine to try .95f on and see if it connects?

]]> Sat, 25 Jan 2014 15:59:53 +0000 https://www.soliforum.com/post/47686/#p47686 <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/47607/#p47607 Mike,

I have to check previous version when I get home.  Odd I was able to get it connected with just diabling the reset on connect.  then again I am using windows 7 x64.  will also have to check on win 8 laprtop later tonight

]]> Fri, 24 Jan 2014 14:12:44 +0000 https://www.soliforum.com/post/47607/#p47607 <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/47578/#p47578 is there something to do with the firmware? like i remember having to allow something to go through like i had to allow the connection between my port and the the printer and in windows 8 i had to go into recovery mode or something, do i have to do that again?

]]> Fri, 24 Jan 2014 02:46:22 +0000 https://www.soliforum.com/post/47578/#p47578 <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/47576/#p47576 i ran through all the settings with the reset on connect under printer settings as well as the baud rates, do some of the earlier versions work?

]]> Fri, 24 Jan 2014 02:30:23 +0000 https://www.soliforum.com/post/47576/#p47576 <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/47557/#p47557 Mike,

Just tried testing on Printrboard and I get the same thing with .95f.  I see 6 commands waiting no matter what Baud rate I set it to.

However, Under Printer settings, If I change the RESET ON CONNECT to "disabled" It appears to connect but I get a ton of errors about "extruder switched off" (OF COURSE it's a bare board so would expect that).  Check that and let me know what happens

]]> Thu, 23 Jan 2014 22:44:49 +0000 https://www.soliforum.com/post/47557/#p47557 <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/47516/#p47516 Actually SOLIDOODLE instructions state 115,200 for Printrboard, I use 250000 for SANGUINO board

]]> Thu, 23 Jan 2014 14:26:12 +0000 https://www.soliforum.com/post/47516/#p47516 <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/47513/#p47513 Doesn't the firmware specifically look for 250,000?

]]> Thu, 23 Jan 2014 14:18:27 +0000 https://www.soliforum.com/post/47513/#p47513 <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/47464/#p47464 57600, just like .85b which is running.

]]> Thu, 23 Jan 2014 02:52:56 +0000 https://www.soliforum.com/post/47464/#p47464 <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/47391/#p47391 whats your baud rate?

]]> Wed, 22 Jan 2014 12:22:16 +0000 https://www.soliforum.com/post/47391/#p47391 <![CDATA[Re: install issue with Repetier V0.95F]]> https://www.soliforum.com/post/47374/#p47374 Actually I think GrJimmy figured it out.  He lives just down the street from me and he is working right now.  I'll ask him to respond when he gets a minute.

]]> Wed, 22 Jan 2014 03:12:01 +0000 https://www.soliforum.com/post/47374/#p47374