<![CDATA[SoliForum - 3D Printing Community — KiSSlicer profile for SD3]]> https://www.soliforum.com/topic/2035/kisslicer-profile-for-sd3/ Fri, 12 Apr 2013 00:14:44 +0000 PunBB <![CDATA[Re: KiSSlicer profile for SD3]]> https://www.soliforum.com/post/19593/#p19593 Check this out for some of the settings people have been using. Since you have an SD3 you will obviously need to set the bed size larger than in these settings ( I think most are for SD2). Everything else should be the same.

http://www.soliforum.com/topic/348/kisslicer/

]]> Fri, 12 Apr 2013 00:14:44 +0000 https://www.soliforum.com/post/19593/#p19593 <![CDATA[KiSSlicer profile for SD3]]> https://www.soliforum.com/post/19513/#p19513 Does any one use the KiSSlicer?

I'm using the 1.1.0 Release Candidate, and it's very good at slicing models, especially organic looking ones.  I found it can accurately slice objects that Slic3r can't handle at all.  Plus it's fast as hell.

My problems is that I"m still a total newb, and I don't know how to properly set it up with the correct G-Codes.

Mind you, I was able to import and print Gcode generated by KiSSlicer, but I'm not sure I have all the correct settings, especially for things like cooling, flow, speed, ABS settings, PLA settings, etc.

If anyone that's been doing this and using the KiSSlicer for a while has any input or better yet a SoliDoodle profile for it, it would be greatly appreciated.


Thanks,

]]> Thu, 11 Apr 2013 18:26:51 +0000 https://www.soliforum.com/post/19513/#p19513