<![CDATA[SoliForum - 3D Printing Community — Wall mount]]> https://www.soliforum.com/topic/17671/wall-mount/ Mon, 29 Oct 2018 05:02:10 +0000 PunBB <![CDATA[Re: Wall mount]]> https://www.soliforum.com/post/147125/#p147125 I use this one for both vertical and 45:
https://www.thingiverse.com/thing:1508688

]]> Mon, 29 Oct 2018 05:02:10 +0000 https://www.soliforum.com/post/147125/#p147125 <![CDATA[Re: Wall mount]]> https://www.soliforum.com/post/147089/#p147089 Thank you,
Are there any hopper designs that can be downloaded for vertical hoppers? I’m leaning towards a vertical setup. Also, how much wall space should I plan for? What is the ideal distance between the filastruder and the winder?

]]> Fri, 26 Oct 2018 14:36:14 +0000 https://www.soliforum.com/post/147089/#p147089 <![CDATA[Re: Wall mount]]> https://www.soliforum.com/post/147077/#p147077 Back before I got my winder I used to use a 45, photos here: http://www.soliforum.com/topic/15397/ma … lac-pa758/

It worked pretty well for ABS, less so for PLA.  Downside to wall mounting is sometimes it can hurt pellet feeding, which is why some people end up adding vibration motors after going vertical.

]]> Fri, 26 Oct 2018 04:15:50 +0000 https://www.soliforum.com/post/147077/#p147077 <![CDATA[Re: Wall mount]]> https://www.soliforum.com/post/146943/#p146943 Anybody have any further thoughts about vertical wall mount vs horizontal setup? Has anyone tried a 45º wall mount?

]]> Thu, 18 Oct 2018 10:28:43 +0000 https://www.soliforum.com/post/146943/#p146943 <![CDATA[Re: Wall mount]]> https://www.soliforum.com/post/146939/#p146939 Didn't get the filawinder yet. I thought I would built one kit at a time. Certainly will though. Is it just gravity that makes wall mounting better?

]]> Wed, 17 Oct 2018 09:43:35 +0000 https://www.soliforum.com/post/146939/#p146939 <![CDATA[Re: Wall mount]]> https://www.soliforum.com/post/146935/#p146935 wall mounting I find produces the best results. Did you get the filawinder also?

]]> Wed, 17 Oct 2018 01:57:38 +0000 https://www.soliforum.com/post/146935/#p146935 <![CDATA[Wall mount]]> https://www.soliforum.com/post/146934/#p146934 Hi everyone,

I am a new user. Filastruder is on its way to me now. My first question is how to mount the machine? Is vertical wall mounting the preferred method?

Thank you all in advance

]]> Wed, 17 Oct 2018 01:26:08 +0000 https://www.soliforum.com/post/146934/#p146934