<![CDATA[SoliForum - 3D Printing Community — No power, but not power supply]]> https://www.soliforum.com/topic/15157/no-power-but-not-power-supply/ Fri, 15 Jul 2016 02:28:05 +0000 PunBB <![CDATA[Re: No power, but not power supply]]> https://www.soliforum.com/post/125089/#p125089 They all basically install the same way.  Flash with the firmware from the WIKI and connect all the wires.  Most of which is labeled on the boards.

]]> Fri, 15 Jul 2016 02:28:05 +0000 https://www.soliforum.com/post/125089/#p125089 <![CDATA[Re: No power, but not power supply]]> https://www.soliforum.com/post/125088/#p125088 ramps 1.4

https://www.amazon.com/OSOYOO-Printer-C … =RAMPS+1.4

how to install
http://www.soliforum.com/topic/2816/how … ontroller/

]]> Fri, 15 Jul 2016 02:06:00 +0000 https://www.soliforum.com/post/125088/#p125088 <![CDATA[Re: No power, but not power supply]]> https://www.soliforum.com/post/125086/#p125086 wardjr wrote:

Buy a Ramps 1.4
An Azteeg X3
Or my favorite the Rumba
Any of these will be light years ahead of what you currently have and have been well documented here.

I hate to bother you, but I am having trouble finding a post with the details. I used the search function and it's just turning up every comment with something remotely related. Could you link it or tell me something specific to search for?

]]> Fri, 15 Jul 2016 02:00:22 +0000 https://www.soliforum.com/post/125086/#p125086 <![CDATA[Re: No power, but not power supply]]> https://www.soliforum.com/post/125085/#p125085 wardjr wrote:

Buy a Ramps 1.4
An Azteeg X3
Or my favorite the Rumba
Any of these will be light years ahead of what you currently have and have been well documented here.

Thank you. I'll look into those!

]]> Fri, 15 Jul 2016 01:44:48 +0000 https://www.soliforum.com/post/125085/#p125085 <![CDATA[Re: No power, but not power supply]]> https://www.soliforum.com/post/125084/#p125084 Buy a Ramps 1.4
An Azteeg X3
Or my favorite the Rumba
Any of these will be light years ahead of what you currently have and have been well documented here.

]]> Fri, 15 Jul 2016 01:40:25 +0000 https://www.soliforum.com/post/125084/#p125084 <![CDATA[No power, but not power supply]]> https://www.soliforum.com/post/125082/#p125082 Hello,

I have an old Sanguinololu Solidoodle 3 that finally took a hard dump. I suspected it was the power supply and replaced it, but still no power. Well, that's not entirely true... when I plug it in after it has sat for a few minutes, it lights up/fans on for a split second; did it with both old and new PSUs. So, now I am wondering what I should do. Can I trouble shoot some more components, get a new board, or something else?

I also unplugged all the connections to the board individually to see if there was a short somewhere and still nothing... so I think it's in the board itself. I've heard of people upgrading the Sanguinololu boards to something newer, so should I try that? Any advice is appreciated.

]]> Fri, 15 Jul 2016 01:13:25 +0000 https://www.soliforum.com/post/125082/#p125082