<![CDATA[SoliForum - 3D Printing Community — Use CURA with Da Vinci Printer]]> 2019-04-27T13:53:26Z PunBB https://www.soliforum.com/topic/6508/use-cura-with-da-vinci-printer/ <![CDATA[Re: Use CURA with Da Vinci Printer]]> Me thinks this is the read you need http://www.soliforum.com/topic/17028/pr … minimaker/

]]> https://www.soliforum.com/user/6775/ 2019-04-27T13:53:26Z https://www.soliforum.com/post/150290/#p150290 <![CDATA[Re: Use CURA with Da Vinci Printer]]> bumping this old thread, how do i go about sending gcode straight to my da vinci mini w printer? do i need to use the xyz software to send it after i slice the object in cura? also, in linux you could run a terminal command to replace G0's with G1's...

]]> https://www.soliforum.com/user/20829/ 2019-04-26T13:49:08Z https://www.soliforum.com/post/150283/#p150283 <![CDATA[Re: Use CURA with Da Vinci Printer]]> it's much more convenient like this,
sometimes i still have to use slicer because cura doesn't not provide honeycomb filling

]]> https://www.soliforum.com/user/5637/ 2015-01-17T12:31:26Z https://www.soliforum.com/post/79690/#p79690 <![CDATA[Re: Use CURA with Da Vinci Printer]]> joshj wrote:

you could use an advanced editor like notepad++ and use a replace all.

jaak wrote:

WOW respect!
there must be a way to make it automatic, with a script

thanks for this detail that can change everything

The xyzware open mod version does the conversion for you automatically when you import the gcode.

]]> https://www.soliforum.com/user/6872/ 2015-01-16T16:56:52Z https://www.soliforum.com/post/79507/#p79507 <![CDATA[Re: Use CURA with Da Vinci Printer]]> What were your settings in the cura software? I was able to get slic3r to work with settings I found on a "scribd" writeup, prints looked great!
But I'm having trouble figuring out how to translate those settings to the cura. The prints come out looking horrible. All sorts of issues.
Thanks
Matt G

]]> https://www.soliforum.com/user/9018/ 2015-01-16T14:29:26Z https://www.soliforum.com/post/79473/#p79473 <![CDATA[Re: Use CURA with Da Vinci Printer]]> ok think i've got it
didn't know about the new xyz software

]]> https://www.soliforum.com/user/5637/ 2014-07-05T17:42:13Z https://www.soliforum.com/post/59814/#p59814 <![CDATA[Re: Use CURA with Da Vinci Printer]]> joshj wrote:

Something I noticed with the cura gcode output today. the first move was a combined x y z move, so that meens it goes straight to the point specified. Considering that my z home position is bellow bed face that caused issues as I am sure you can imagine. so adding a nominal z move prior to this solved the issue.

And again as far as swapping g codes just use the note pad and do a replace all. It should be fine.


i've seen that you've been running your printer with cura during 8 hours
could you send us the profile you used?
did you change gcode , Z offset or else?

thanks

]]> https://www.soliforum.com/user/5637/ 2014-07-05T16:22:26Z https://www.soliforum.com/post/59808/#p59808 <![CDATA[Re: Use CURA with Da Vinci Printer]]> Something I noticed with the cura gcode output today. the first move was a combined x y z move, so that meens it goes straight to the point specified. Considering that my z home position is bellow bed face that caused issues as I am sure you can imagine. so adding a nominal z move prior to this solved the issue.

And again as far as swapping g codes just use the note pad and do a replace all. It should be fine.

]]> https://www.soliforum.com/user/5588/ 2014-05-29T20:28:32Z https://www.soliforum.com/post/57342/#p57342 <![CDATA[Re: Use CURA with Da Vinci Printer]]> G0 - Rapid Motion
G1 - Coordinated Motion




http://replicat.org/gcodes

]]> https://www.soliforum.com/user/5637/ 2014-05-29T14:29:48Z https://www.soliforum.com/post/57299/#p57299 <![CDATA[Re: Use CURA with Da Vinci Printer]]> tjtai wrote:

I was able to print successfully using Cura.  I compared the gcode generated by xyzware against Cura for the same STL file and noticed Cura use G0 command in gcode whereas xyzware doesn't.  So I replaced all G0 with G1 and voila, it printed beautifully provided the usual xyzware header is included.  There is no need to offset any z value.  The only downside is I had to manually replace G0 with G1 line by line and that took a long time even for a small file.  It would be nice if someone can write a little program that will automatically replace all G0 with G1.


WOW respect!
there must be a way to make it automatic, with a script

thanks for this detail that can change everything

]]> https://www.soliforum.com/user/5637/ 2014-05-29T14:28:37Z https://www.soliforum.com/post/57298/#p57298 <![CDATA[Re: Use CURA with Da Vinci Printer]]> you could use an advanced editor like notepad++ and use a replace all.

]]> https://www.soliforum.com/user/5588/ 2014-05-29T11:21:25Z https://www.soliforum.com/post/57272/#p57272 <![CDATA[Re: Use CURA with Da Vinci Printer]]> I was able to print successfully using Cura.  I compared the gcode generated by xyzware against Cura for the same STL file and noticed Cura use G0 command in gcode whereas xyzware doesn't.  So I replaced all G0 with G1 and voila, it printed beautifully provided the usual xyzware header is included.  There is no need to offset any z value.  The only downside is I had to manually replace G0 with G1 line by line and that took a long time even for a small file.  It would be nice if someone can write a little program that will automatically replace all G0 with G1.

]]> https://www.soliforum.com/user/5684/ 2014-05-29T06:01:30Z https://www.soliforum.com/post/57264/#p57264 <![CDATA[Re: Use CURA with Da Vinci Printer]]> i only had succes one time but after several (10/15) layers z axis stopped working
so i suppose it's possible to do it, i just don't know where i'm mistaking
and i realy don't know much things about programming

]]> https://www.soliforum.com/user/5637/ 2014-05-27T23:51:03Z https://www.soliforum.com/post/57129/#p57129 <![CDATA[Re: Use CURA with Da Vinci Printer]]> Cura will not work with the stock XYZ firmware, because it can't handle simultaneous XZ, YZ or XYZ moves. It does work with the Repetier firmware, I used it many times with no problems. On a Mac the "Ping Pong communication" option in the Repetier Host must be turned on to avoid a nasty bug in the Host.

]]> https://www.soliforum.com/user/5627/ 2014-05-27T19:34:44Z https://www.soliforum.com/post/57100/#p57100 <![CDATA[Re: Use CURA with Da Vinci Printer]]> from what I have seen no one has been able to use cura for prints yet. I tried once with the repetier firmware and it failed like there wasno gcode to send so it may have been a user error, but every report of trying through xyzware is the same as yours almost. Is your cura set to absolute or relative position?

]]> https://www.soliforum.com/user/5588/ 2014-05-27T07:10:43Z https://www.soliforum.com/post/57059/#p57059