<![CDATA[SoliForum - 3D Printing Community — install issue with Repetier V0.95F]]> 2014-01-31T00:36:40Z PunBB https://www.soliforum.com/topic/5244/install-issue-with-repetier-v095f/ <![CDATA[Re: install issue with Repetier V0.95F]]> I'm no expert but don't you need to uncheck hide travel up top?

]]> https://www.soliforum.com/user/2291/ 2014-01-31T00:36:40Z https://www.soliforum.com/post/48279/#p48279 <![CDATA[Re: install issue with Repetier V0.95F]]> This is what I see.

]]> https://www.soliforum.com/user/574/ 2014-01-31T00:33:06Z https://www.soliforum.com/post/48277/#p48277 <![CDATA[Re: install issue with Repetier V0.95F]]> satman49 wrote:

Another issue I have with win 8 is, on the manual tab it doesn't show the visual printing progress(all versions of RH).It works ok in win xp tho

Works fine here, as long as RH is the active foreground app. When its backgrounded or non-active, it doesn't continue plotting the OpenGL stuff... but it updates to its present position the moment its back in the foreground.

My experience on Win8.1 x64 anyway...

]]> https://www.soliforum.com/user/663/ 2014-01-30T01:30:47Z https://www.soliforum.com/post/48195/#p48195 <![CDATA[Re: install issue with Repetier V0.95F]]> Another issue I have with win 8 is, on the manual tab it doesn't show the visual printing progress(all versions of RH).It works ok in win xp tho

]]> https://www.soliforum.com/user/574/ 2014-01-29T22:15:41Z https://www.soliforum.com/post/48167/#p48167 <![CDATA[Re: install issue with Repetier V0.95F]]> the solution is here :

http://www.soliforum.com/topic/5270/pro … windows-8/


sorry.. you need to translate it... it's not a probleme of repetier host version, it's a problem of win8

Asdesas wrote:

....

Donc le premier soucis que j'ai eu est le port (COM3 par défaut n'était pas bon).

Pour règler cela: vas à droite de l'écran avec ta souris
- rechercher "device manager"
- cliquer sur "mettre à jour les pilotes de périphérique"
- puis dans l'onglet Ports (COM et LPT).

Une fois la iste de port ouverte tu dois clic droit sur le port concerné (moi c'était USB Serial Port (COM3) )

- cliquer sur " mettre à jour le pilote "
- puis  "rechercher un pilote sur mon ordinateur "
- "choisir une liste de pilotes de périphériques sur mon ordinateur
- sélectionner le bon dans la liste (pour moi "USB serial port")
- faire suivant, et si tu as le message disant que c'est ok, tu dois redemarrer ton ordi.

La première fois ça n'a pas marché pour moi (2ième problème mais perso pour moi celui la) j'ai dufaire un clic droit sur le port à changer - propriété - paramètres du port - cliquer sur "avancé" et changer le numéro du port (j'ai mis COM12, je sais pas pourquoi).
Refaire toute l'étape du dessus,

- redémarrer Repetier Host
-Réglages imprimantes et pour la donnée "port" mettre le nouveau "COM" (pour moi COM12) et bien mettre la vitesse sur 250000.

...

]]> https://www.soliforum.com/user/40/ 2014-01-27T13:38:52Z https://www.soliforum.com/post/47863/#p47863 <![CDATA[Re: install issue with Repetier V0.95F]]> Alright Might I went through every iteration of Repetier and .85b, .90c and .95f all work on my windows 7 machine and only thing I had to change to get it to work with .90c and .95F was the reset on connect had to be set to disable.  I even have all 3 versions installed in separate directories on my system.

I was reading however that there seems to be a problem with WIN 8 and installs.  One link I was reading on reprap forum was stating that with Wn 8 you needed to do a complete uninstall an reinstall the newer version but the uninstall does not remove all the Registry keys like it should and you have to manually go in and remove the entry "HKEY_CURRENT_USER\Software\repetier"

However... Before you go that route I would try the following.  I will have a win 8 laptop installed in a couple of hours and I will test also from this side.
1. Disable Reset on connect...
2.  try running RH .95F in compatibility mode http://www.dummies.com/how-to/content/h … ows-8.html
3. Can you get your hands on a WIN7 machine to try .95f on and see if it connects?

]]> https://www.soliforum.com/user/644/ 2014-01-25T15:59:53Z https://www.soliforum.com/post/47686/#p47686 <![CDATA[Re: install issue with Repetier V0.95F]]> Mike,

I have to check previous version when I get home.  Odd I was able to get it connected with just diabling the reset on connect.  then again I am using windows 7 x64.  will also have to check on win 8 laprtop later tonight

]]> https://www.soliforum.com/user/644/ 2014-01-24T14:12:44Z https://www.soliforum.com/post/47607/#p47607 <![CDATA[Re: install issue with Repetier V0.95F]]> is there something to do with the firmware? like i remember having to allow something to go through like i had to allow the connection between my port and the the printer and in windows 8 i had to go into recovery mode or something, do i have to do that again?

]]> https://www.soliforum.com/user/2962/ 2014-01-24T02:46:22Z https://www.soliforum.com/post/47578/#p47578 <![CDATA[Re: install issue with Repetier V0.95F]]> i ran through all the settings with the reset on connect under printer settings as well as the baud rates, do some of the earlier versions work?

]]> https://www.soliforum.com/user/2962/ 2014-01-24T02:30:23Z https://www.soliforum.com/post/47576/#p47576 <![CDATA[Re: install issue with Repetier V0.95F]]> Mike,

Just tried testing on Printrboard and I get the same thing with .95f.  I see 6 commands waiting no matter what Baud rate I set it to.

However, Under Printer settings, If I change the RESET ON CONNECT to "disabled" It appears to connect but I get a ton of errors about "extruder switched off" (OF COURSE it's a bare board so would expect that).  Check that and let me know what happens

]]> https://www.soliforum.com/user/644/ 2014-01-23T22:44:49Z https://www.soliforum.com/post/47557/#p47557 <![CDATA[Re: install issue with Repetier V0.95F]]> Actually SOLIDOODLE instructions state 115,200 for Printrboard, I use 250000 for SANGUINO board

]]> https://www.soliforum.com/user/644/ 2014-01-23T14:26:12Z https://www.soliforum.com/post/47516/#p47516 <![CDATA[Re: install issue with Repetier V0.95F]]> Doesn't the firmware specifically look for 250,000?

]]> https://www.soliforum.com/user/644/ 2014-01-23T14:18:27Z https://www.soliforum.com/post/47513/#p47513 <![CDATA[Re: install issue with Repetier V0.95F]]> 57600, just like .85b which is running.

]]> https://www.soliforum.com/user/2962/ 2014-01-23T02:52:56Z https://www.soliforum.com/post/47464/#p47464 <![CDATA[Re: install issue with Repetier V0.95F]]> whats your baud rate?

]]> https://www.soliforum.com/user/456/ 2014-01-22T12:22:16Z https://www.soliforum.com/post/47391/#p47391 <![CDATA[Re: install issue with Repetier V0.95F]]> Actually I think GrJimmy figured it out.  He lives just down the street from me and he is working right now.  I'll ask him to respond when he gets a minute.

]]> https://www.soliforum.com/user/2291/ 2014-01-22T03:12:01Z https://www.soliforum.com/post/47374/#p47374