SoliForum - 3D Printing Community — How to remove a finished print from the bed?

Re: How to remove a finished print from the bed?

2013-11-13T18:33:24Z

convert to glass / mirror bed for less time waiting between prints to cool down before starting up again.

Re: How to remove a finished print from the bed?

2013-11-12T11:02:19Z

Thank you elmoret - and your right - I should have done a search first.

Re: How to remove a finished print from the bed?

2013-11-12T05:10:00Z

Cool the bed, use razorblade or cricut spatula.

And search next time. This has been covered probably 50 times already.

http://www.soliforum.com/topic/2997/too … olidoodle/

How to remove a finished print from the bed?

2013-11-12T05:05:55Z

Hi all
I have finally managed to print my first item – jippppiii – after 2 years…puuhhh.

I find that the item is almost glued to the heated bed. What is the best method to remove the print?

- Should I cool down the bed and use my fingers to pull it out?
- Do I use a hammer and give it a bump so it come loose?
- Should I use a knife to put in-between the bed and the print and force it out?

Some feedback of how you do it without damaging the printer would be great.

Best regards Stein