<![CDATA[SoliForum - 3D Printing Community — E3D Titan extruder]]> 2022-09-03T00:47:07Z PunBB https://www.soliforum.com/topic/14535/e3d-titan-extruder/ <![CDATA[Re: E3D Titan extruder]]> updated missing deleted files

]]> https://www.soliforum.com/user/7746/ 2022-09-03T00:47:07Z https://www.soliforum.com/post/155434/#p155434 <![CDATA[Re: E3D Titan extruder]]> I'm a little late to the party! I am planning on installing a Titan in my DaVinci 1.0a. It should be delivered this week.

I tried downloading the files listed in the first page of this thread and the links are bad. Too old I guess.

ENJOY!

Attachment icon Configuration.h 70.95 kb, 51 downloads since 2016-05-06

Attachment icon cutting drill guide v2.stl [ 3D Preview ] 47.35 kb, 53 downloads since 2016-05-06

Attachment icon Daughterboard Bracket.stl [ 3D Preview ] 2.04 kb, 38 downloads since 2016-05-06

Attachment icon Extruder Bracket holes fill.stl [ 3D Preview ] 26.74 kb, 48 downloads since 2016-05-06

Attachment icon Extruder Bracket No New Holes.stl [ 3D Preview ] 19.91 kb, 63 downloads since 2016-05-06


Anybody still have a working link to these? Or similar that I can get.

]]> https://www.soliforum.com/user/23073/ 2021-02-26T14:55:42Z https://www.soliforum.com/post/154543/#p154543 <![CDATA[Re: E3D Titan extruder]]> NoHands wrote:
scobo wrote:

I made a part for mine that fits onto the z endstop to raise it by 3mm as I now use a 3mm sheet of aluminium on the top of the glass bed which had formed a crack.

yer I used aluminum for a while but nothing stuck to it  so i got some 3mm glass cut n put that on worked heaps better smile

Yeah, bare aluminium is useless. I have a Buildtak sheet on the aluminium plate.

]]> https://www.soliforum.com/user/6872/ 2017-07-08T14:23:23Z https://www.soliforum.com/post/136536/#p136536 <![CDATA[Re: E3D Titan extruder]]> scobo wrote:

I made a part for mine that fits onto the z endstop to raise it by 3mm as I now use a 3mm sheet of aluminium on the top of the glass bed which had formed a crack.

yer I used aluminum for a while but nothing stuck to it  so i got some 3mm glass cut n put that on worked heaps better smile

]]> https://www.soliforum.com/user/13308/ 2017-07-08T13:48:38Z https://www.soliforum.com/post/136534/#p136534 <![CDATA[Re: E3D Titan extruder]]> I made a part for mine that fits onto the z endstop to raise it by 3mm as I now use a 3mm sheet of aluminium on the top of the glass bed which had formed a crack.

]]> https://www.soliforum.com/user/6872/ 2017-07-06T14:09:29Z https://www.soliforum.com/post/136503/#p136503 <![CDATA[Re: E3D Titan extruder]]> evanalmighty wrote:

Yes this is the stock carriage.  You'll lose some Z height so just add an extension to the Z endstop trigger arm and call it a day.

how did you make adjustments on the Z end stop did you just move it?

]]> https://www.soliforum.com/user/13308/ 2017-07-06T12:43:31Z https://www.soliforum.com/post/136501/#p136501 <![CDATA[Re: E3D Titan extruder]]> I decided against fitting a Titan for now.
Instead, I designed my own combined extruder/E3D mount ...... http://www.thingiverse.com/thing:1723817
Without wanting to blow my own trumpet, it's been working better than I expected, even with flexibles.

]]> https://www.soliforum.com/user/6872/ 2017-02-08T20:09:39Z https://www.soliforum.com/post/132258/#p132258 <![CDATA[Re: E3D Titan extruder]]> Thats a familiar name :-) I have not printed anything on my Da Vinci in 6 months but I was having issues with my other printer so I thought I would fire it up again.


ssauntson wrote:

Well its been a good 6 months since i posted here last and I am extremely happy with my Da Vinci 1.0 printer(s) fitted with the Titan Extruder.

When I change from PLA - ABS and vice versa.  I use this protocol. I use the Load/Unload function on the Repetier Firmware on the Arduino Due Board. Then once I have changed the filament, I run through at least 300mm of the new filament to make sure I have removed all residue of the previous filament.
I think in 6 months I have had one occasion when I have had to remove the Extruder and that was because a wire came detached. Replaced the Ferrule with a solder joint, job done.

any specific questions,please feel free to contact me as I don't get so much time to keep logging on.

Happy Printing

]]> https://www.soliforum.com/user/5990/ 2017-02-08T19:14:47Z https://www.soliforum.com/post/132254/#p132254 <![CDATA[Re: E3D Titan extruder]]> First things First. I have wasted a lot of filament trying to print this thing, last print was almost successful and looked the best so far! but it failed due to what i think might be the servo for the extruder overheating and not pushing the filament well after a 5 hours of print. I'm using everything stock other than firmware and the fact i soldered the connector for the heating element. I saw someone add a fan to the back of the servo and said it helped them. yes i have cleaned the gears multiple times now, last time being hardly ANYTHING on the extruder gear. Ill have to try to find a fan laying around that will fit. until then im going to try this print again with structures, i put grid and lowered the fill% on those this time around. anyways I guess my question is what setting did you guys use to print this? did you use the stock extruder and hotend? I think im almost there, but i don't want to use up an entire roll of filament and not have a working carriage =[ any help appreciated. thank you again! FORGOT to mention: The extruder clicks when the print is almost done, if i push the filament it extrudes and grips better when the servo cools down.

]]> https://www.soliforum.com/user/15605/ 2016-12-21T12:15:16Z https://www.soliforum.com/post/129521/#p129521 <![CDATA[Re: E3D Titan extruder]]> Tin Falcon wrote:

why mess with a clone . If you are needing to save  $$ get a lite.

I didn't even look into the Lite 6, seems to be the way to go for now. I am such a n00b. I just figured out how to rotate the object to the correct side to print. lesson learner, Filament wasted. Print time reduced, no structure needed.

]]> https://www.soliforum.com/user/15605/ 2016-12-20T13:08:02Z https://www.soliforum.com/post/129457/#p129457 <![CDATA[Re: E3D Titan extruder]]> why mess with a clone . If you are needing to save  $$ get a lite.

]]> https://www.soliforum.com/user/6775/ 2016-12-20T11:29:24Z https://www.soliforum.com/post/129449/#p129449 <![CDATA[Re: E3D Titan extruder]]> Read through all post and i would like to know where to start with a virgin davinci with repetier to dot he titan/v6 mod as it stand currently. Is wiley's design working well yet? I printed it with a couple flaws and ended up cutting off the belt holder while not thinking of what it was for as this is where my slight printing error occurred.  I am using black ABS. I have a clone e#d v6 in front of me and a clone titan on the way(hopefully this will work out and fit as it is all I could afford.) I'm using CuraEngine as it seems to give better results for me right now and my settings for cura are attached.


The Titan Clone I Ordered: http://www.ebay.com/itm/182314917213
The Clone V6 I ordered: http://www.ebay.com/itm/172138307610?_t … EBIDX%3AIT

Note that the v6 did NOT come with ANY PTFE tubing. Not even in the heatbreak.

]]> https://www.soliforum.com/user/15605/ 2016-12-20T10:08:24Z https://www.soliforum.com/post/129446/#p129446 <![CDATA[Re: E3D Titan extruder]]> What gives you the idea a Titan Extruder comes with a motor?
Either way you'll need to change your steps per mm for E:

]]> https://www.soliforum.com/user/2291/ 2016-10-20T13:37:50Z https://www.soliforum.com/post/127640/#p127640 <![CDATA[Re: E3D Titan extruder]]> Does anyone know how to configure the XYZ Printer to work with the new 400 stepper motor that is supplied with the TITAN Extruder?

]]> https://www.soliforum.com/user/15242/ 2016-10-20T11:41:44Z https://www.soliforum.com/post/127638/#p127638 <![CDATA[Re: E3D Titan extruder]]> +wileys http://www.soliforum.com/topic/15009/e3 … iage-beta/

]]> https://www.soliforum.com/user/5990/ 2016-07-04T17:23:54Z https://www.soliforum.com/post/124780/#p124780