carl_m1968 wrote:efes wrote:hello
My 3D printer davinci 1.0 repetier firmware 3DP01
filament 1.75 ESUN PLA color brown, I tested with transparent filament I have the same thing?the filament enters the extruder smoothly.
it comes out smoothly at first and then clic clic clic ???please look problem https://youtu.be/aXief8wxBvI
thank you for reading me and find the solutions together !
A 1.0 cannot use PLA unless you buy the option head for 100 bucks from XYZ. The adverting is sort of misleading as they don't you on the box that the different head is necessary. I suggest you stop trying to use PLA before you get a jam and clog that is impossible to remove. Unlike ABS, PLA cannot be dissolved by acetone or anything else that is safe to use outside of a lab.
Only the 1.0A and beyond can print PLA straight from the box.
Thank You for your reply express !
100usd ? there is no other cheaper solution?
There are mods that can be done, PM Scobo as he has been successful with relatively cheap mods like adding heat sinks and repositioning the fan and has printed with everything PLA and even wood. There are several threads on modding the hot end but I think Scobo's is the least expensive and does not require a 3d Printer for the parts.
]]>efes wrote:hello
My 3D printer davinci 1.0 repetier firmware 3DP01
filament 1.75 ESUN PLA color brown, I tested with transparent filament I have the same thing?the filament enters the extruder smoothly.
it comes out smoothly at first and then clic clic clic ???please look problem https://youtu.be/aXief8wxBvI
thank you for reading me and find the solutions together !
A 1.0 cannot use PLA unless you buy the option head for 100 bucks from XYZ. The adverting is sort of misleading as they don't you on the box that the different head is necessary. I suggest you stop trying to use PLA before you get a jam and clog that is impossible to remove. Unlike ABS, PLA cannot be dissolved by acetone or anything else that is safe to use outside of a lab.
Only the 1.0A and beyond can print PLA straight from the box.
Thank You for your reply express !
100usd ? there is no other cheaper solution?
hello
My 3D printer davinci 1.0 repetier firmware 3DP01
filament 1.75 ESUN PLA color brown, I tested with transparent filament I have the same thing?the filament enters the extruder smoothly.
it comes out smoothly at first and then clic clic clic ???please look problem https://youtu.be/aXief8wxBvI
thank you for reading me and find the solutions together !
A 1.0 cannot use PLA unless you buy the option head for 100 bucks from XYZ. The adverting is sort of misleading as they don't you on the box that the different head is necessary. I suggest you stop trying to use PLA before you get a jam and clog that is impossible to remove. Unlike ABS, PLA cannot be dissolved by acetone or anything else that is safe to use outside of a lab.
Only the 1.0A and beyond can print PLA straight from the box.
]]>My 3D printer davinci 1.0 repetier firmware 3DP01
filament 1.75 ESUN PLA color brown, I tested with transparent filament I have the same thing?
the filament enters the extruder smoothly.
it comes out smoothly at first and then clic clic clic ???
please look problem https://youtu.be/aXief8wxBvI
thank you for reading me and find the solutions together !
]]>