You are not logged in. Please login or register.
SoliForum - 3D Printing Community → XYZ Printing DaVinci → Best Prints with Da Vinci 1.0 [Pictures]
just printed this tonight, took 4 hours, running 1.1.G using xyzware 1.1.29.4. It looks great
Print another one with a diffrent pose. Swap em when people arnt looking 
Awesome, what slicer are you using? I need those supports, or did it come with the model?
Awesome, what slicer are you using? I need those supports, or did it come with the model?
if you are talking about my weeping angel, just the stock xyz software & stock firmware @ 10% infill, .2, standard shells, slow speed, no supports needed.
i just printed this last night from the same guy who made the weeping angel, it came out AWESOME except the elbow, which i can sand.
here is the guys website, he does AWESOME stuff. http://www.makershop.co/shop/fantasygraph
10% infill, .1(this time), standard shells, slow speed, no supports needed
Of course, the guy who designed these and many others is our very own superstar fantasy modeler "ysb" on these forums!
I encourage everyone to contribute what you can for his excellent works through that website.
Hope I don't anger anyone with this post given the age of the thread but it was helpful to me when considering this printer. At $375 shipped, I had to pick it up!
I printed this from thingiverse using Firmware ver. 1.1.J, XYZWare 1.1.30.16, with the out the box stock calibration. The only thing I changed was I printed and installed the belt tensioner by Rueben on thingiverse.
Printer Settings:
Density: 30%
Shells: Normal
Layer Height: 0.1
Speed: Slow
No Rafts or Support (model has built in support)
Print time 9h:10m
$375 SHIPPED!? WOW I thought 550€ delivered (I paid) was cheap! LOL.
I got mine at newegg on the black friday deal....$469 with 7 filaments and free shipping!
Sorry to thread jack but there are some new users posting and I'm just wondering if these newer versions are still OK to install the Repetier firmware? I saw somewhere on here suggesting it may not be safe with newer models.
Sorry to thread jack but there are some new users posting and I'm just wondering if these newer versions are still OK to install the Repetier firmware? I saw somewhere on here suggesting it may not be safe with newer models.
This will answer your question.
Fully working fishing reel (fly reel) .....
Giant Lego Darth Vader finished with acetone vapour ....
Oh nice.
I have been looking into Acetone vapour but not sure about messing around with flammable liquids. I can be really stupid sometimes 
I have seen a video of someone smoothing ABS with mould and degreaser spray too.
The acetone is safe enough as long as you use it in a well ventilated area.
I use a cheap steam cooker to heat a very small amount of acetone only for about a minute at most then turn the power off and leave for 5 minutes.
This is usually enough to coat an average sized print and smooth it without any further processing.
Thanks, unfortunately I have the incompatible serial number. Do you know if we can still reset the cartridge eeeprom?
SoliForum - 3D Printing Community → XYZ Printing DaVinci → Best Prints with Da Vinci 1.0 [Pictures]
Powered by PunBB, supported by Informer Technologies, Inc.
