Re: E3D releases v6 - their latest all-metal hotend
Hm. I say.. fifty? Is this the place to say it? I certainly want a 50% voucher
EDIT: realized that there arent piles of e3d's in the boxes.
26 2014-05-31 05:39:13 (edited by ITman496 2014-05-31 05:40:14)
Re: E3D releases v6 - their latest all-metal hotend
Yup, this is the place to say it. The competition is not number of E3Ds, but total number of packages.
Re: E3D releases v6 - their latest all-metal hotend
wardjr wrote:
E3D V-6 MK-5
Printed it and a v6 hot end fits. Probably could still be tweaked slightly, but it'll do for now.
Re: E3D releases v6 - their latest all-metal hotend
on those top packages, is each bag a package? or are you counting the box they are in?
Re: E3D releases v6 - their latest all-metal hotend
A package is anything with a shipping label on it. Open boxes are just holding packages.
Re: E3D releases v6 - their latest all-metal hotend
okay, cool. I stand by my guess then~
- AZERATE
- PRINTiT
- Offline
Re: E3D releases v6 - their latest all-metal hotend
I'm guessing 55....not that I'm trying to 5-up ITman. Legitimate estimate 
Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!
- wardjr
- Moderator
- Offline
Re: E3D releases v6 - their latest all-metal hotend
I would like to remove myself from the competition 
Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
Re: E3D releases v6 - their latest all-metal hotend
I came up with a calculation, but I think that if I say my guess, I'd be boo'd out.
Re: E3D releases v6 - their latest all-metal hotend
im going for 64
Re: E3D releases v6 - their latest all-metal hotend
I'll bet there is at least 70
- wire10ga
- Member
- Offline
Re: E3D releases v6 - their latest all-metal hotend
102
SD2 - Glass Bed, Fans on PCB and Y motor, Custom enclosure
Slicer - Simplify3D
Slicer - Simplify3D
Re: E3D releases v6 - their latest all-metal hotend
427
- LdyMox
- Member
- Offline
Re: E3D releases v6 - their latest all-metal hotend
118
Tammy
Solidoodle 2
E3Dv6 Hotend, MK5 v6 version, Glass Bed, Anti Z backlash slop nut, SureStepr SD8825 1/32 Extruder Driver, makeshift breakaway plexiglass case; . L-Cheapo 3.8 Watt Laser Attachment w/Custom built enclosure
From Buffalo, NY, USA
Solidoodle 2
E3Dv6 Hotend, MK5 v6 version, Glass Bed, Anti Z backlash slop nut, SureStepr SD8825 1/32 Extruder Driver, makeshift breakaway plexiglass case; . L-Cheapo 3.8 Watt Laser Attachment w/Custom built enclosure
From Buffalo, NY, USA
Re: E3D releases v6 - their latest all-metal hotend
wire10ga wrote:
102
The answer is 105. You win! I'll PM you a code shortly.
Re: E3D releases v6 - their latest all-metal hotend
Has anyone installed this into a Solidoodle 3 yet? Was it difficult?
Re: E3D releases v6 - their latest all-metal hotend
Many people have. Difficulty depends on your level of experience.
Re: E3D releases v6 - their latest all-metal hotend
I'm about to get mine ordered but I'm still deciding on connectors. Are the wires for the heater and the thermistor both 22 gauge? I'm thinking of using these JST plugs to make the connection at the extruder, and the heat shrink connectors to hook up to the JST's on each side. Is this a good choice? Thanks.
JST plugs:
http://www.amazon.com/dp/B00DU8HLM4/ref … QV1OWIEZCM
Heat Skrink Connectors:
http://www.amazon.com/dp/B00HUHGYKG/ref … EBCYKEKBHQ
SD4 w/ RUMBA, E3D Volcano, all bearings, glass bed
44 2014-07-13 15:44:06 (edited by kallisti5 2014-07-13 15:56:20)
Re: E3D releases v6 - their latest all-metal hotend
Hm. Why did we drop the locking arm on the e3d v6 adjustments to the mk5? It always felt like a nice "just incase" thing for those 5-6 hour prints :-)
- wardjr
- Moderator
- Offline
Re: E3D releases v6 - their latest all-metal hotend
Are you having problems with it? Just in case of what?
The v6 should snap into place rather firmly. I threw that together quickly to help Tim out when the v6 was first introduced. If there are tweaks that are needed I welcome the feedback.
Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
Re: E3D releases v6 - their latest all-metal hotend
wardjr wrote:
Are you having problems with it? Just in case of what?
The v6 should snap into place rather firmly. I threw that together quickly to help Tim out when the v6 was first introduced. If there are tweaks that are needed I welcome the feedback.
Ah, I just printed it a few hours ago, I see what you mean about the snap. I didn't realize before how the lip now snaped to the extruder in the model preview. Don't have my v6 yet, but yeah... nice work! You should upload this to thingiverse so more people can find it.
- wardjr
- Moderator
- Offline
Re: E3D releases v6 - their latest all-metal hotend
AZERATE just put it on there for me. I'm away from my PC for the next couple of weeks. Hope it works out for you.
Printit Industries Model 8.10 fully enclosed CoreXY, Chamber heat
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
3-SD3's & a Workbench all fully enclosed, RH-Slic3r Win7pro, E3D V6, Volcano & Cyclops Hot End
SSR/500W AC Heated Glass Bed, Linear bearings on SS rods. Direct Drive Y-axis, BulldogXL
Thanks to all for your contributions
- AZERATE
- PRINTiT
- Offline
Re: E3D releases v6 - their latest all-metal hotend
http://www.thingiverse.com/thing:393928
I don't have a v6, but I just got done printing it. I *was* concerned about the locking arm since I use that AND the blank accessory bar since I'm paranoid like that. But that little hook wardjr worked in looks solid even side by side comparison with my other extruders.
Printit Mason and Printit Horizon printers
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!
Multiple SD2s- Bulldog XL, E3D v5/v6/Lite6, Volcano, Hobb Goblin, Titan, .9 motor, Lawsy carriages, direct Y drive, fishing line...the list goes on
Filawinder and Filastruder #1870.....worth every penny!
49 2014-07-16 18:57:24 (edited by kpauley 2014-07-16 18:58:03)
Re: E3D releases v6 - their latest all-metal hotend
So my E3D V6 hot end is on it's way. What parts do I need to print to get it mounted in a stock Solidoodle 3?
Re: E3D releases v6 - their latest all-metal hotend
Lawsy Mk6 wardjr remix. It is linked in the very post above yours.