Topic: Assembly pic of thrust plate area
Tim, are you able to post a cad model or pic showing the thrust plate area? I've got the white plate and steel flange version. Thank you!
Re: Assembly pic of thrust plate area
Not at the moment, but from motor side to nozzle side:
motor side - flange, white plate, thrust bearing (with both races), shaft collar, 10mm washer if included.
Same as the cad model on steps 9-12, but instead of one big block, there's the laser cut plate and the flange. Flat side of the flange faces the plate.
Re: Assembly pic of thrust plate area
Double up the nylon spacers?
Re: Assembly pic of thrust plate area
Nope! Definitely not. Eight are included because sometimes the bolts in this batch don't have enough thread, so you can use the spacers between the nut and washer to move the nut out to where there's thread.
Re: Assembly pic of thrust plate area
Thanks Tim.
Re: Assembly pic of thrust plate area
Upload a picture of what you ended up with and I'll tell you if its right.
Re: Assembly pic of thrust plate area
Here it is Tim.
Re: Assembly pic of thrust plate area
You got it!
I need to get shorter bolts, but I ordered 1000. :-/
Re: Assembly pic of thrust plate area
Function over form. It can be a beautiful thing...some of the time. Thanks Tim.