1 Topic by nickythegreek (edited by nickythegreek 2013-04-09 20:01:30)

  • nickythegreek
  • Member
  • Offline
  • Registered: 2012-11-18
  • Posts: 673

Topic: Released: Repetier-Host .85b / RH-Mac .54

Website: Repetier-Host

Version 0.85
  Slic3r 0.9.9 included
  Store slicer selection with printer settings.
    Drag and Drop of stl and g-code files into host.
    Preview of G2/G3 in xy plane.
    Fixed some viewing errors.
    Set DTR to off on connect. Reduces error rate on some boards.
    Security question if heaters are on during close.
    Check if objects are inside printable area before slicing starts.
    Better error correction with Marlin.
    Create only as many filament configs as extruders enabled in host.
    Added @execute host command to call programs during print.
    In parallel top view user and view center are moved to stay on top.


RH-Mac
Version 0.54 to be released
Slic3r 0.9.9
Preview of G2/G3 in xy plane.
Fixed some viewing errors.
Set DTR to off on connect.
Better error correction with Marlin.
Added @execute host command to call programs during print.
Stores slicer profile selection together with selected printer.
In parallel mode, panning moves viewpoint and user.
Security question when disconnecting with enabled heaters.

2 Reply by lawsy

  • lawsy
  • Moderator
  • Offline
  • Registered: 2012-08-13
  • Posts: 1,220

Re: Released: Repetier-Host .85b / RH-Mac .54

With this update the start gcode variables now work again.

lawsy's Website

3 Reply by timp610

  • timp610
  • Member
  • Offline
  • From: buffalo ny
  • Registered: 2012-11-27
  • Posts: 112

Re: Released: Repetier-Host .85b / RH-Mac .54

I updated mine but it shows a lot more strange blobs on the objects in the gcode view.

4 Reply by nickythegreek

  • nickythegreek
  • Member
  • Offline
  • Registered: 2012-11-18
  • Posts: 673

Re: Released: Repetier-Host .85b / RH-Mac .54

updated thread to reflect release notes in RH-Mac .54

5 Reply by Stoney

  • Stoney
  • Member
  • Offline
  • From: Gold Coast, Australa
  • Registered: 2012-08-08
  • Posts: 181

Re: Released: Repetier-Host .85b / RH-Mac .54

eek, just updated mine and now having issues.
"I could not find the generated G-code file"

enabling log says ..
"<slic3r> Can't call  method "clone" on umblessed refererence at C:/prog files/rep-host/slic3r/lib/std/slic3r/Print.pm line 157"

(i typed it in so folder names are not spot on ..)

Thought I would have alook at print.pm and there is no slic3r folder in the std directory.

what did I do wrong ?
did nothing apart from install new version and run. wrong ?

6 Reply by Stoney

  • Stoney
  • Member
  • Offline
  • From: Gold Coast, Australa
  • Registered: 2012-08-08
  • Posts: 181

Re: Released: Repetier-Host .85b / RH-Mac .54

installed 0.84 over the top of 0.85 .. working now.
I have no idea why its just mine, must be a config incorrect somewhere.

7 Reply by wilheldp

  • wilheldp
  • Member
  • Offline
  • Registered: 2013-03-16
  • Posts: 85

Re: Released: Repetier-Host .85b / RH-Mac .54

My SD3 arrives tomorrow, so I'm getting things ready.  I see that the Solidoodle page has an RH download with profiles already loaded, but it isn't the latest version of RH.  I actually downloaded RH 0.85b before I realized that the profiles were included with the SD download link.  Is there somewhere I can score the .ini files for both 0.1mm and 0.3mm for the SD3 for RH 0.85b?  (wow, that was a lot of acronyms)

8 Reply by Arcadenut

  • Arcadenut
  • Member
  • Offline
  • From: Glendale, AZ
  • Registered: 2013-02-19
  • Posts: 33

Re: Released: Repetier-Host .85b / RH-Mac .54

wilheldp wrote:

My SD3 arrives tomorrow, so I'm getting things ready.  I see that the Solidoodle page has an RH download with profiles already loaded, but it isn't the latest version of RH.  I actually downloaded RH 0.85b before I realized that the profiles were included with the SD download link.  Is there somewhere I can score the .ini files for both 0.1mm and 0.3mm for the SD3 for RH 0.85b?  (wow, that was a lot of acronyms)


The settings are stored in the registry.  If you've installed the Solidoodle version of RH, then look here:

HKEY_CURRENT_USER\Software\repetierSolidoodle\printer

What I did, was I exported that branch, then edited the file and replaced repetierSolidoodle with repetier and then reimported it.

Do so at your own risk.

Arcadenut's Website

9 Reply by Skyblue

  • Skyblue
  • Member
  • Offline
  • From: Keller, Texas
  • Registered: 2013-01-04
  • Posts: 201

Re: Released: Repetier-Host .85b / RH-Mac .54

I updated and had problems.  Prints would stop after 20 to 30 min's.  Reverted back to original install version (85b) and all works well now.

10 Reply by wilheldp

  • wilheldp
  • Member
  • Offline
  • Registered: 2013-03-16
  • Posts: 85

Re: Released: Repetier-Host .85b / RH-Mac .54

Thanks Arcadenut, but I never installed the SD version of RH.  Isn't there a way to export/import the .ini files that are compatible with the SD?

11 Reply by Gordym

  • Gordym
  • Member
  • Offline
  • From: Adrian, MI
  • Registered: 2012-08-10
  • Posts: 317

Re: Released: Repetier-Host .85b / RH-Mac .54

I have an SD2 so my settings will be different than yours however, if you can download the ini files from Solidoodle, you can open the slicer config page then under the File menu you can import those settings using the Load Settings option. (At least on the PC version.) This will bring in the Solidoodle INI's to the latest version of RH. After that, when you upgrade from RH's website, all the settings will be brought into the new version automatically.

SD2
E3D V6
MK5 V6