1 Topic by GerardDirks (edited by GerardDirks 2020-06-26 07:52:48)

  • GerardDirks
  • Member
  • Offline
  • From: Uetliburg - Switzerland
  • Registered: 2020-05-15
  • Posts: 110

Topic: Original Tag denied by 3D Printer because of Firmware Downgrade

Hello

I did a Firmware Downgrade with the Flasher from Modfreakz from 1.3.9 to 1.1.9. I was between on 1.2.9, but this version has an issue with the WLAN?!?

With 1.1.9 I am able to use the WLAN again!

I have another issue with an Original XYZPrinting TAG and Reel! I still have 72m left on the Reel and TAG but when I want to use it the 3DPrinter complains with an Error "0028_1" I see this problem also with the paper tags after the downgrade!

- How Can I solve this issue?
- Which Software; Update NTAG oder NTAG Edit Tool 1.40
- What need to be changed?

Is it also possible to reactive an empty TAG (0 meter) to use again a new reel?

Regards
Gérard
http://soliforum.com/i/?5uhQ8vd.png
http://soliforum.com/i/?rJkPne1.png

2 Reply by carl_m1968

  • carl_m1968
  • carl_m1968
  • Member
  • Offline
  • From: Far North almost not Dallas
  • Registered: 2014-10-17
  • Posts: 6,512

Re: Original Tag denied by 3D Printer because of Firmware Downgrade

If you tried to print with it and the object to be printed called for more than the roll said it had it would be marked as empty in the printers memory and stay there till that entry became number 100 at which point it would be pushed out and could be used again.

Printing since 2009 and still love it!
Anycubic 4MAX best $225 ever invested.
Voxelabs Proxima SLA. 6 inch 2k Mono LCD.
Anycubic Predator, massive Delta machine. 450 x 370 print envelope.

3 Reply by GerardDirks

  • GerardDirks
  • Member
  • Offline
  • From: Uetliburg - Switzerland
  • Registered: 2020-05-15
  • Posts: 110

Re: Original Tag denied by 3D Printer because of Firmware Downgrade

@carl_m1968

I have no idea how I can print 72meter with "one" figure ?!? The largest Item i printed was 13meter!

THe first time I see this error was after I downgrade from 1.3.9 to 1.2.9! This was the time I hadn't any paper tag or thirdparty filament.

I supposed this original Tag is mapped out by XYZPrinting!
I want to start in the near future to print with other filament. I need to wait till the paperclips will arrive. Yesterday I was able to get the Arduino Nano & PN532 working (in a different way describes in this forum) ?!?