1 Topic by fabriziocirella

  • fabriziocirella
  • Newbie
  • Offline
  • Registered: 2020-04-14
  • Posts: 1

Topic: Extruder connexion/ replacement problem !

Hi everbody, sorry for my bad english i'am from belgium ^^

I'a gonna try to explain to you my "little" problem.

1 weeks ago, my uncle give to me a XYZ Da vinci 1.0 Pro with an extruder / nozzle problem. Specially the wire of the heater cartridge was broken.

I tried to replace it with no succes. Then i saw the wire of the temparature prob was broken too.

I decided to buy a new head for the 3d Printer.

I recieved it today... And bad joke... The seller was assuring me that head was made for my printer model. But i got a problem with the board connexion.

My board is that with "W5" in her center.

My problem is next. The cable i recieved with the new extruder module don't fit qith my board.

And the initial Extruder i had 3 ports: one for the heat cartridge , one temparature prob and an third for de supply of the nozzle.
On the other side, i had 1 data cable with 14 holes.

The new one have only 6 holes.

On the board, i have no port with 6 holes. Only the principal with 14 and no individual port for the heater wire...

Here my boardhttp://soliforum.com/i/?XDbGvGQ.jpg (i took the image from another post)

http://soliforum.com/i/?CYoEZSA.jpg


Here the first extruder i got to change.

http://soliforum.com/i/?hPjig61.jpg

http://soliforum.com/i/?PxwKcYQ.jpg

http://soliforum.com/i/?c4HGW06.jpg

And finally here the new extruder

http://soliforum.com/i/?cHDXpmB.jpg


What i have to do with thise new one ? Is he compatible with my board ?

I hope i've clearly explain my problem.

Thanks for your response guys.