1 Topic by Deadcatwalking

  • Deadcatwalking
  • Newbie
  • Offline
  • Registered: 2019-10-21
  • Posts: 1

Topic: Filastruder Kit What Nozzle is 3.0mm that comes with the kit?

Hi. Deadcatwalking here!

We've got a https://www.filastruder.com/products/fi … =338125893 and it's missing "THE NOZZLE" to print in 3.0mm and we'd like to know what the stock nozzle that comes with the kit?

Thank you in advance.

2 Reply by heartless

  • heartless
  • heartless
  • Member
  • Offline
  • From: Northcentral Wisconsin
  • Registered: 2015-04-08
  • Posts: 2,152

Re: Filastruder Kit What Nozzle is 3.0mm that comes with the kit?

might want to try posting in the Filastruder section for this.

http://www.soliforum.com/forum/18/filastruder/

SD4 #1 & #2 - Lawsy carriages, E3D v6, Rumba controller board, mirror bed plate, X motor fan, upgraded PSU & Mica bed heater
SD4 #3 - in the works ~ Folgertech FT-5, rev 1
Printit Industries Beta Tester - Horizon H1

3 Reply by elmoret

  • elmoret
  • Filastruder
  • Offline
  • Registered: 2012-10-11
  • Posts: 6,048

Re: Filastruder Kit What Nozzle is 3.0mm that comes with the kit?

I don't understand the question. You say "to print", but a Filastruder isn't a 3D printer, it is a filament extruder. You say you need 3.0mm, but then ask what nozzle comes with the kit?

At any rate, the kit comes with a choice of either an undrilled, 1.75mm, or 3.0mm nozzle.

Filastruder - the robust, inexpensive filament extruder
E3Dv6 All Metal Hotend - the premier 3D printing hotend

4 Reply by genesat1

  • genesat1
  • Member
  • Offline
  • Registered: 2015-04-26
  • Posts: 184

Re: Filastruder Kit What Nozzle is 3.0mm that comes with the kit?

elmoret wrote:

I don't understand the question. You say "to print", but a Filastruder isn't a 3D printer, it is a filament extruder. You say you need 3.0mm, but then ask what nozzle comes with the kit?

At any rate, the kit comes with a choice of either an undrilled, 1.75mm, or 3.0mm nozzle.

I’m not completely sure this is what he meant, but I think he was asking what size hole to drill to produce 3mm filament (like how the stock size for 1.75mm filament is a 1.6mm hole.)