Topic: food dehydrator to dry filament
My ABS filament has pulled in moisture so i got this and modified it today.
Notice the thermometer.
Thanks
Dale
You are not logged in. Please login or register.
SoliForum - 3D Printing Community → Filament → food dehydrator to dry filament
My ABS filament has pulled in moisture so i got this and modified it today.
Notice the thermometer.
Thanks
Dale
You can store it the freezer to keep moisture out and you can use the freezer to remove moisture as well. It's a process called sublimation.
Carl
I keep the Lid to the fry daddy i use for vapor bathing in the freezer and my wife always fusses about it. So i can just see her now if
i start putting filament in it.
I took my calibrated type K TC meter and checked the temp.
it fluctuates about 10°F but average is 162°F
A fresh you tube video on the subject . Interesting.
I live in Florida and the outside temp and humidity are high.
the temp and humidity inside is 79° & 41%
below is the outside temp and humidity
and below that is what is considered the optimum
indoor humidity. My indoor humidity is Optimum.
Dale
https://www.hvac.com/faq/recommended-hu … evel-home/
SoliForum - 3D Printing Community → Filament → food dehydrator to dry filament
Powered by PunBB, supported by Informer Technologies, Inc.