You are not logged in. Please login or register.
SoliForum - 3D Printing Community → Filastruder → FilaWinder BBspool Adaptor
I have just finished a new spool adaptor which allows for spools with larger center holes to be used. I could not find anything that had already been done or shared so hopefully it helps.
Will stop the spool touching the drive gear and the pins on the control board.
nice work
I have just finished a new spool adaptor which allows for spools with larger center holes to be used. I could not find anything that had already been done or shared so hopefully it helps.
Will stop the spool touching the drive gear and the pins on the control board.
I noticed in the STL you have a circle floating in midair in the middle. It didn't seem to mess up my print of it, and it works better than the adapter I was using before, so thank you.
Ah. I have probably uploaded the old stl with the infil part. Yes should not cause any problems, maybe a little extra filament to the edges as its not attached. I will get the stl replaced.
Glad it helps out.
Try this one.
Thats what i use.
https://www.thingiverse.com/thing:2786127
I had them made long time ago, just never published.
SoliForum - 3D Printing Community → Filastruder → FilaWinder BBspool Adaptor
Powered by PunBB, supported by Informer Technologies, Inc.
