Re: New 3rd party Resin from ApplyLabWork
I personally haven't done it, but from the looks of it, you just need to desolder 3 pins, 2 on one side and one on the other side of the controller PCB.
Take a look here:
http://form1printer.pbworks.com/w/page/ … he%20Form1
As for the mirrors, when I cleaned my galvo mirrors, I used a 5x jewelers loupe to make sure there's not dust or fine lint strands, and then used a microfiber cloth, rather than a Qtip. I did use the Qtip to clean the laser lens; stick it in the opening, and give it a quick twist, then use the magnifier glass to make sure there's nothing left behind.
To print or, 3D print, that is the question...
SD3 printer w/too many mods, Printrbot Simple Maker Ed., FormLabs Form 1+
AnyCubic Photon, Shining 3D EinScan-S & Atlas 3D scanners...
...and too much time on my hands.
SD3 printer w/too many mods, Printrbot Simple Maker Ed., FormLabs Form 1+
AnyCubic Photon, Shining 3D EinScan-S & Atlas 3D scanners...
...and too much time on my hands.